58410
1.REMOVE ENGINE SERVICE HOLE COVER
58734B
2.REMOVE ENGINE SERVICE COVER WEATHERSTRIP REAR
58521D
3.REMOVE ENGINE SERVICE HOLE COVER MAT
58420
4.REMOVE NO. 2 ENGINE SERVICE HOLE COVER ASSEMBLY
58534A
5.REMOVE TRANSMISSION COVER MAT
33531B
6.REMOVE SHIFT AND SELECT LEVER SHAFT DUST BOOT
33820B
7.DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY
33504F
8.REMOVE SHIFT LEVER SUB-ASSEMBLY
58701A
9.REMOVE FRONT ENGINE SERVICE COVER PANEL SUB-ASSEMBLY
51459
10.REMOVE ENGINE SIDE COVER STAY (for TCAP Made)
51441D
11.REMOVE NO. 1 ENGINE UNDER COVER (for Plastic Type)
51441D
12.REMOVE NO. 1 ENGINE UNDER COVER (for Metal Type)
53712C
13.REMOVE FRONT FENDER APRON LH
Remove the 6 bolts and the front fender apron LH.
17342P
14.REMOVE NO. 2 AIR HOSE
Disconnect the connector and the 2 hose clamps.
Loosen the 2 clamps.
Remove the bolt and the No. 2 air hose.
17113
15.REMOVE INTAKE PIPE WITH VENTURI ASSEMBLY
Disconnect the throttle control motor connector and throttle position sensor connector.
Disconnect the vacuum hose from the intake pipe.
Remove the bolt and separate the oil level dipstick guide.
Remove the 2 nuts, 2 bolts and the intake pipe with venturi assembly.
26100
16.REMOVE VENTURI ASSEMBLY
Remove the 4 nuts and the venturi assembly.