58410
1.REMOVE ENGINE SERVICE HOLE COVER
58734B
2.REMOVE ENGINE SERVICE COVER WEATHERSTRIP REAR
58521D
3.REMOVE ENGINE SERVICE HOLE COVER MAT
58420
4.REMOVE NO. 2 ENGINE SERVICE HOLE COVER ASSEMBLY
58534A
5.REMOVE TRANSMISSION COVER MAT
33531B
6.REMOVE SHIFT AND SELECT LEVER SHAFT DUST BOOT
33820B
7.DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY
33504F
8.REMOVE SHIFT LEVER SUB-ASSEMBLY
58701A
9.REMOVE FRONT ENGINE SERVICE COVER PANEL SUB-ASSEMBLY
51459
10.REMOVE ENGINE SIDE COVER STAY (for TCAP Made)
51441D
11.REMOVE NO. 1 ENGINE UNDER COVER (for Plastic Type)
51441D
12.REMOVE NO. 1 ENGINE UNDER COVER (for Metal Type)
13.DRAIN ENGINE COOLANT
14.REMOVE NO. 1 V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT (w/ Air Conditioning System)
| *1 | Fixing Bolt A |
| *2 | Adjusting Bolt B |
Loosen the adjusting bolt B.
Loosen the fixing bolt A, then remove the No. 1 V belt.
88320
15.SEPARATE COOLER COMPRESSOR ASSEMBLY (w/ Air Conditioning System)
16572
16.REMOVE OUTLET RADIATOR HOSE
Slide the 2 hose clamps and remove the outlet radiator hose.
16701
17.REMOVE FAN SHROUD SUB-ASSEMBLY
Loosen the 4 nuts from the fan pulley.
Remove the fan and generator V belt.
Click hereEngine / Hybrid System>N04C-UH (ENGINE MECHANICAL)>DRIVE BELT>REMOVAL
Disengage the hose clamp and disconnect the No. 1 intercooler air hose.
Disengage the 3 hose clamps and disconnect the radiator reservoir hose.
Remove the 4 bolts from the fan shroud sub-assembly.
Remove the fluid coupling assembly and fan shroud sub-assembly.
Be careful not to damage the radiator core.
16361
18.REMOVE FAN
Remove the 4 nuts and fan from the fluid coupling assembly.
16371
19.REMOVE FAN PULLEY
Remove the fan pulley from the engine water pump assembly.