REMOVAL / INSTALLATION
| Symbol Meaning | |
|---|---|
|
Remove Weld Points |
|
Plug Weld |
*a: Bolt
Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.
Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)
Measure the dimensions before installing the headlights.
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 956 mm (37.64 in.) | B | 1048 mm (41.26 in.) |
| C | 1459 mm (57.44 in.) | D | 715 mm (28.15 in.) |
| E | 894 mm (35.20 in.) | F | 568 mm (22.36 in.) |
| G | 799 mm (31.46 in.) | H | 619 mm (24.37 in.) |
| I | 907 mm (35.71 in.) | - | - |