Home › Vehicle Exterior › BODY PANEL › FRONT FENDER APRON
BM24M0E _01 Vehicle Exterior _059852 BODY WELD POINT _0293737 FRONT FENDER APRON F

BODY WELD POINT  FRONT FENDER APRON  ASSEMBLY REPLACEMENT  


K133132


With the radiator support and cowl top side panel removed.


REMOVAL / INSTALLATION


Symbol Meaning
K108818

Remove Weld Points
K108819

Remove Weld Points
K108820

Remove Weld Points
K108823

Plug Weld
K108824

Plug Weld
K108825

Plug Weld

INSTALLATION POINT
1.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

2.

Make sure to attach correctry in accordance with the body dimention diagram as this part affects the front wheel alignment.

3.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

4.

After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)

5.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K133166C01
0.354,0.333 0.667,0.49 0.313,0.156 10 false *A 2.833,4.917 3.146,5.073 0.313,0.156 10 false *B
*A LH *B RH


K133167