With the front fender apron removed.
REMOVAL
| Symbol Meaning | |
|---|---|
|
Remove Weld Points |
Make sure to attach correctry in accordance with the body dimention diagram as this part affects the front wheel alignment.
INSTALLATION
| Symbol Meaning | |
|---|---|
|
Remove Weld Points |
|
Plug Weld |
Remove the front part from a new front side member.
Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)
Make sure to attach correctry in accordance with the body dimention diagram as this part affects the front wheel alignment.
After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)
After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.