Home › Vehicle Exterior › BODY PANEL › FRONT SIDE MEMBER
BM24M0E _01 Vehicle Exterior _059852 BODY WELD POINT _0293738 FRONT SIDE MEMBER F

BODY WELD POINT  FRONT SIDE MEMBER  CUT AND JOIN REPLACEMENT SECTIONS (SMALL AREAS)  


K133133


With the radiator support removed.


REMOVAL / INSTALLATION


Symbol Meaning
K108818

Remove Weld Points
K108827

Cut and Join Location
K108823

Plug Weld
K108831

Butt Weld

REMOVAL POINT
1.

*a: Take care not to damage the internal reinforcement.


INSTALLATION POINT
1.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

2.

After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)

3.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K133168C01
1.625,5.958 1.792,5.375 false 0.333,0.333 0.646,0.49 0.313,0.156 10 false *A 2.156,5.948 2.833,6.365 0.677,0.417 10 false 250 (9.84) 1.542,5.969 1.854,6.125 0.313,0.156 10 false *a 6.844,8.552 7.156,8.708 0.313,0.156 10 false *b
*A LH - -
*b mm (in.) - -


K133169C01
0.333,0.333 0.646,0.49 0.313,0.156 10 false *A 4.833,7.969 5.146,8.125 0.313,0.156 10 false A 4.865,7.51 5.177,7.667 0.313,0.156 10 false B
*A LH - -


Reference Value:
Area Measurement Area Measurement
A 186 mm (7.32 in.) B 74 mm (2.91 in.)


K133170C01
5.115,5.75 4.917,5.24 false 0.333,0.333 0.646,0.49 0.313,0.156 10 false *A 5.083,5.771 5.396,5.927 0.313,0.156 10 false *a 3.917,5.885 4.688,6.313 0.771,0.427 10 false 270 (10.63) 6.844,8.552 7.156,8.708 0.313,0.156 10 false *b
*A RH - -
*b mm (in.) - -


K133171C01
0.354,0.333 0.667,0.49 0.313,0.156 10 false *A 4.375,7.688 4.688,7.844 0.313,0.156 10 false A
*A RH - -


Reference Value:
Area Measurement Area Measurement
A 255 mm (10.04 in.) - -