With the rear floor rear inner crossmember and rear floor pan removed.
REMOVAL
| Symbol Meaning | |
|---|---|
|
Remove Weld Points |
|
Cut and Join Location |
Remove the rear floor side rear member at the same time.
*a: Take care not to damage the internal reinforcement.
| *1 | Rear Floor Side Rear Member | - | - |
| *b | mm (in.) | - | - |
INSTALLATION
| Symbol Meaning | |
|---|---|
|
Remove Weld Points |
|
Plug Weld |
|
Cut and Join Location |
|
Butt Weld |
Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)
After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)
After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.
| *1 | Rear Floor Side Rear Member | - | - |
| *a | mm (in.) | - | - |
| *1 | Rear Floor Side Rear Member | - | - |