For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter
mm (in.) |
|---|---|---|
| A, a | Front fender installation nut | M6 (0.24) |
| B, b | Front spring support hole-inner | φ12.5 (0.492) |
| C, c | Hood hinge installation nut | M8 (0.31) |
| D, d | Cowl panel installation nut | M6 (0.24) |
| E, e | Front side member standard hole | φ18 (0.71) |
| F | Front side member standard hole | φ16 (0.63) |
| f | Engine front mounting bracket installation nut | M12 (0.47) |
| G, g | Radiator upper support installation nut | M8 (0.31) |
| H, h | Radiator support standard hole | φ16 (0.63) |
| I, i | Radiator support to front fender bracket standard hole | φ10 (0.39) |
| J, j | Front bumper reinforcement installation hole | φ10 (0.39) |
| K, k | Radiator upper support installation nut | M8 (0.31) |
| *a | Vehicle Dimensions | *b | Height from Imaginary Standard Line |
| *c | mm
(in.) |
- | - |