For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter
mm (in.) |
|---|---|---|
| A, a | Front frame installation hole | φ36 (1.42) |
| B, b | Front frame standard hole | φ12 (0.47) |
| C, c | Power steering tube installation hole | φ17 (0.67) |
| D, d | Lower control arm installation hole | φ21X18.5
(0.83X0.728) |
| E, e | Front frame installation hole | φ22 (0.87) |
| *A | Front | *B | LH |
| *C | RH | - | - |
| *a | Imaginary Standard Line | *b | mm
(in.) |