For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
These values are actual measurements made on model. Use these reference values.
Measure point with the Radiator Support Seal Upper, Front Fender To Cowl Side Seal and Hood removed.
| Symbol | Name | Hole Diameter
mm (in.) |
|---|---|---|
| A, a | Radiator upper support installation bolt | - |
| B, b | Headlight installation bolt | - |
| C, c | Front fender installation bolt | - |
| D, d | Front fender installation bolt | - |
| *a | Vehicle Dimensions | *b | mm
(in.) |