Home › Vehicle Exterior › BODY PANEL › ROOF PANEL(for Glass Roof)
BM24M0E _01 Vehicle Exterior _059852 BODY WELD POINT _0293789 ROOF PANEL(for Glass Roof) F

BODY WELD POINT  ROOF PANEL(for Glass Roof)  ASSEMBLY REPLACEMENT  


K133159

REMOVAL / INSTALLATION


Symbol Meaning
K108818

Remove Weld Points
K108823

Plug Weld
K108834

Body Sealer


INSTALLATION POINT
1.

Before temporarily installing the new parts, apply body sealer to the windshield header panel, roof panel reinforcement and back door opening upper frame.

HINT:

Apply just enough body sealer for the new parts to make contact.


2.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

3.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

4.

After welding, apply body sealer to the corresponding parts. (See the painting / coating)

5.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K133221