With the quarter panel removed.
REMOVAL / INSTALLATION
| Symbol Meaning | |
|---|---|
|
Remove Weld Points |
|
Remove Weld Points |
|
Remove Weld Points |
|
Plug Weld |
|
Plug Weld |
|
Plug Weld |
Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.
After applying body sealer, install the roof side outer upper No.1 rail.
Apply sealer in an even continuous bead.
After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)
After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.
| *A | LH | *B | RH |
| *1 | Roof Side Outer Upper No.1 Rail (Reuse) | - | - |
| *a | mm (in.) | - | - |