CONSTRUCTION
Axle Beam and Trailing Arm
The axle beam realizes not only high rigidity but also stability by optimized shearing center position. The axle beam is welded to both trailing arm and spring seat. The trailing arm is fixed on the body via a trailing arm bushing.
Coil Spring and Shock Absorber
Both ends of the coil spring have been formed into a small-diameter, pigtail shape. The compact construction has been designed to accommodate the low floor package.
The shape of the upper spring seat has been optimized and a new lower spring seat is used to ensure a high level of vibration isolation performance.
The shock absorber uses a new piston valve and a viscoelastic oil seal to realize excellent driving stability and ride comfort.