OUTLINE
The combination meter in the new models has the following features:
The Optitron display type combination meter or the analog display type combination meter is available.
The speedometer is located in the center of the combination meter.
The indicators are located and integrated in the combination meter.
The tachometer is located on one side of the speedometer, and the water temperature gauge and the fuel gauge on the other.
To achieve the sense of depth, the top end of the tachometer, water temperature gauge, and fuel gauge are tilted further forward of the vehicle than the speedometer.
The dials of the speedometer, tachometer, water temperature gauge, and fuel gauge are provided with graduations.
The step-motor is used to actuate the indicators of the speedometer, the tachometer, the fuel gauge and the water temperature gauge.
| *A | Optitron Display Type | *B | Analog Display Type |
If the LEDs have a malfunction, it must be replaced as a combination meter assembly. Refer to Repair Manual.
MAJOR DIFFERENCE
The new models have been modified from the previous models as shown below:
In accordance with the addition of the VSC OFF switch, the following indicators have been added and changed (models with ABS with EBD, Brake Assist, TRC and VSC):
A VSC OFF indicator light and TRC OFF indicator light have been added.
The VSC warning light has been discontinued.
An EPS warning buzzer has been added.s