OUTLINE
The lighting system has the following equipments depending on the model:
HID Headlight System
Intelligent AFS (Adaptive Front-lighting System)
Automatic Headlight Beam Level Control System
Manual Headlight Beam Level Control System
Light Reminder System (Buzzer)
Automatic Light Control System
Light Auto Turn-off System
Front Fog Light
Rear Fog Light
PRECAUTION
HID Headlight System
When the HID headlights illuminate, a high voltage (approximately 20,000 V) is applied momentarily to the bulb sockets, which could lead to a serious accident. Never connect the tester to the high voltage socket of HID headlight for measurement, as this leads to a serious accident because of high voltage.
When performing operation related to the HID headlight, make sure to do it in the place with no water of rain to prevent electric shock, with the light control switch OFF, the battery terminal removed, the connector of the light control ECU disconnected.
When performing an operation related to the HID headlight, make sure to do it after assembling has been completely over and never light up without a bulb installed.
Do not light up the HID headlight using another power source except vehicle's.
When there is a defect on the HID headlight or any shock has been applied to it, replace the light with a new one.
A metal halide bulb reaches a high temperature when it is illuminated. For this reason, the life of the bulb could be shortened if any oil comes in contact with the glass portion of the bulb. Do not touch the glass portion of a bulb with bare hands.