Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM / MULTI INFORMATION SYSTEM
NM24M0E _56 Audio / Visual / Telematics _061680 NAVIGATION / MULTI INFO DISPLAY _0300946 NAVIGATION SYSTEM / MULTI INFORMATION SYSTEM CO CONTROL F

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM / MULTI INFORMATION SYSTEM  CONTROL  NAVIGATION / MULTI INFORMATION  


FUNCTION


a.

Navigation Screen

i.

The navigation ECU calculates the present position, direction of travel, and distance the vehicle has been driven based on the following information sources. This information is displayed on the navigation screen.

- Map data in the built-in memory

- Global Positioning System (GPS) satellites

- Built-in gyro sensor

- Vehicle speed signal

- Reverse signal

- Parking brake signal

- Real-time Traffic Information of China (RTIC) signal


ii.

The functions of the navigation screen display are shown below:

Item Function
Map Display Linear Touch Scroll Enables smooth scrolling when a point on the screen is touched.
Map Color Change The map colors for day and night modes can be selected from among several colors.
Taillight-interlocked Map Color Change Changes the color of the map screen to night mode when the taillights are turned on.
North Up / Heading Up
·

If North Up is selected, regardless of the direction of vehicle travel, north is always up.

·

If Heading Up is selected, the direction of vehicle travel is always up.


Multi-step Scale Display Changes and displays the map scale in 13 steps.
Direct Scale Change Directly selects and displays the map scale.
Street Name Indication on Scrolled Map Displays the street name and town name even when the map screen is being scrolled.
Stepless Scale Display Changes the scale of the map from the basic 13 steps to an even finer range of scales.
Street Name Display Displays the street name on the map.
Point of Interest Display Displays selected types of points of interest as marks on the map.
Split-view Display Displays different modes on a screen that is split into 2 views.
Route Guidance Demonstration Demonstrates the route guidance to the destination.
Route Trace It is possible to store up to the last 200 km (124 miles) of a traveled route and retrace the route on the display.
RTIC Traffic Information Display Displays RTIC icons, arrows and indicators when RTIC service is being received.
Destination Search Preset Destination Memory Search Sets a pre-registered point as a destination point while driving.
Facility Name (Pin Yin) Search A facility name or location name can be input using Pin Yin, and the search can be narrowed down by area or category.
Address / Intersection Search A destination can be set by entering the province, street, intersection and city name.
Point of Interest Search Searches for a point of interest by selecting the area from the category.
Memory Point Search Sets a destination from a registered memory point.
Phone Number Search A destination can be input by entering its phone number.
Point of Interest Near Cursor Search A destination can be set by selecting the search point and point of interest category.
Previous Destination Search Stores the coordinates, names, and dates of up to 100 locations that have been set as destinations in the past.
Map Search A destination can be set by scrolling the cursor on the map.
MAPCODE Search A destination can be set using a MAPCODE.
G Search A destination can be set using information from the Web site (G-memory point).
Route Search Multiple Destination Setting Sets multiple destinations. It can also rearrange the sequence of the destinations.
Multiple Route Search Searches for multiple routes.
Search Condition Designation Searches for the recommended route, the shortest route, a route that prioritizes the use of highways, or a route that prioritizes the use of general roads.
Detour Search Changes the route to detour around a section of the route.
Avoidance Area Searches for a route that avoids a designated area.
Auto Avoid Traffic Search Automatically changes to another route to avoid heavy congestion.
Guidance Voice Guidance Provides voice guidance about the distance and the direction of travel to a destination point based on road conditions and vehicle speed.
Next Turn Guidance Provides guidance about the distance to the next turn and indicates the direction of the turn using an arrow.
Highway Mode Display Displays the distance to the next junction and exit.
Intersection Zoom-in Display Zooms in the image when approaching an intersection.
Lane List Display Displays a lane list on the right side of the 2-screen display.
Distance-to-destination Display Displays the distance from the present location to the destination.
Estimated Arrival Time Display Displays estimated arrival time.



b.

Setup Screen

i.

The settings for the functions of the multi-display are available from the setup screen.

Item Function
Display Settings
·

Map menu and camera screen adjustment.

·

Depending on the position of the headlight switch, the screen changes to day or night mode.


General Settings
·

The beep sound can be turned off.

·

The color of the screen buttons can be changed.

·

Automatic return from the audio screen to the map screen after audio operation can be changed.

·

Registered information (personal data) can be cleared.


Voice Settings
·

The voice guidance volume can be adjusted or switched off.

·

The voice guidance volume can be turned up automatically when the vehicle speed exceeds 80 km/h.

·

Voice guidance while using the audio system can be set.


Navigation Settings
·

Set memory points settings such as:

-

Set up Home

-

Set up Preset Destinations

-

Set up the Address book

-

Set up Areas to Avoid

-

Copy from a USB memory device

-

Backup to a USB memory device


·

Set detailed navigation settings such as:

-

Display the visual city map

-

Display of 3D landmarks

-

Select the desired map color

-

Change the character size on the map

-

Display of the scale switching message

-

G-information mark synchronized service

-

Average cruising speed

-

Animated screen displays

-

Displayed POI icon categories

-

User's setting memorized

-

Manual adjustment of the current vehicle position mark


·

Set up RTIC, traffic information

-

Set voice guidance and show traffic information

-

Set auto avoid traffic reroute search

-

Automatic acquisition of the G-Route Search information

-

Automatic upload setting of vehicle driving history information

-

Tune in the traffic station


·

Delete previous destinations.

·

Map data and program can be updated.


Vehicle Settings
·

Settings can be changed for the following maintenance items:

-

ENGINE OIL

-

OIL FILTER

-

ROTATION

-

TIRE

-

BATTERY

-

BRAKE PAD

-

WIPER

-

LLC

-

BRAKE OIL

-

ATF

-

SERVICE

-

AIR FILTER

-

PERSONAL


·

Customizable vehicle settings can be changed


Phone Settings
·

Phone sound settings can be changed:

-

Adjusted call volume

-

Adjusted ring tone volume

-

Selected ring tone


·

Phonebook settings can be changed:

-

Transferred phonebook data (only available with Bluetooth phones that support PBAP or OPP)

-

Automatic phonebook download (only available with Bluetooth phones that support PBAP)

-

Automatically downloaded call history (only available with Bluetooth phones that support PBAP)

-

Registered phonebook data

-

Edit phonebook data (available with Bluetooth phones that do not support PBAP)

-

Delete phonebook data

-

Registered speed dials

-

Deleted speed dials

-

Delete call history


·

Phone display settings can be changed:

-

Selected incoming call display mode

-

Display phonebook transfer status (only available with Bluetooth phones that support PBAP)

-

Display call history transfer status (only available with Bluetooth phones that support PBAP)

-

Display contact image during incoming call (only available with Bluetooth phones that support PBAP)



Bluetooth Settings
·

A Bluetooth device can be registered.

·

A registered Bluetooth compatible cellular phone can be selected.

·

A registered Bluetooth compatible device can be selected.

·

Information on a registered Bluetooth device can be displayed and the settings can be changed.


Audio Settings
·

iPod settings (display cover art) can be set.

-

Display cover art when a song stored in an iPod is being played.



G-BOOK Settings The G-BOOK settings can be used to:
·

Set detailed functions

-

Canceling the Contract

-

Editing fixed form sentence of the software keyboard


·

Set privacy setting

-

Changing the PIN number

-

Communication lock

-

Deleting a bookmark

-

Deleting the browsing history

-

Set communication utilization of the cellular phone


·

Set communication settings

-

Communication settings for the cellular phone

-

Username and password

-

Confirm settings before communication connection

-

Automatic communication settings






c.

Information Screen

i.

The functions of the information screen display are listed below.

Item Outline
G Main Menu Main Menu Screen G-BOOK on-line services can be operated.
Operator Service Use of the Operator Service A telephone call can be made to the operator service.
Information Check Display of Information Acquired from the Operator Service Acquired information can be displayed and manually updated.




DIAGNOSIS


a.

For details on the procedure required to enter the Service Menu screen, refer to the Repair Manual.