Home › Drivetrain › K112 CVT › CVT SYSTEM › 2013.04–2014.09
NM24M0E _52 Drivetrain _061698 K112 CVT _0300972 CVT SYSTEM UN GENERAL/CONTROL/DETAILS F

K112 CVT  CVT SYSTEM  GENERAL/CONTROL/DETAILS  GENERAL  


OUTLINE


a.

The K112 Continuously Variable Transaxle is used.


b.

The K112 is a steel belt type Continuously Variable Transaxle (CVT) with a torque converter, controlled by fully electronic hydraulic pressure control. The CVT achieves class-leading fuel economy, plus a feeling of smooth driving and excellent drivability via the use of electronic control systems and a pulley-belt unit.

X136045



SPECIFICATION


*1: Reduction gear ratio is included.

*2: Differential included

*3: The weight shown is with the fluid fully filled.

Engine Type 2AZ-FE
Transaxle Type K112
Pulley Ratio Forward 2.396 to 0.428 (Pulley Ratio Width 5.598)
Reverse 1.668
Final Gear Ratio*1 5.470
Fluid Capacity*2 Liters (US qts, Imp. qts) 8.7 (9.2, 7.7)
Fluid Type Toyota Genuine CVT Fluid TC
Weight (Reference)*3 kg (lb) 95 (209.4)

X136046E01
2.406,0.25 2.938,0.25 2.938,0.25 3.563,0.948 true 3.74,1 4.281,0.25 4.281,0.25 4.833,0.25 true 3.615,0.635 3.615,0.333 true 1.979,2 2.396,2 true 4.385,1.365 4.854,0.917 4.854,0.917 5.167,0.917 true 4.417,2 5.208,2 true 4.292,2.271 5.208,2.271 true 4.042,2.833 5.208,2.833 true 4.198,3.344 5.198,3.344 true 2.094,0.469 2.531,0.469 2.531,0.469 2.958,0.938 true 1.979,3.594 2.51,3.594 2.51,3.594 3.031,2.792 true 1.99,2.938 2.479,2.938 2.479,2.938 3.135,2.198 true 3.167,4.375 3.917,4.375 true 1.448,0.167 2.417,0.354 0.969,0.188 10 false Reverse Brake 3.083,0.135 4.167,0.333 1.083,0.198 10 false Planetary Gear 1.125,0.375 2.083,0.583 0.958,0.208 10 false Primary Pulley 1,1.906 2.021,2.115 1.021,0.208 10 false Pulley-Belt Unit 1.323,2.854 2,3.052 0.677,0.198 10 false Steel Belt 0.844,3.49 2,3.708 1.156,0.219 10 false Secondary Pulley 2.177,4.281 3.271,4.479 1.094,0.198 10 false Final Ring Gear 4.896,0.167 5.917,0.385 1.021,0.219 10 false Forward Clutch 5.25,0.833 6.063,1.052 0.813,0.219 10 false Input Shaft 5.24,1.896 6.385,2.094 1.146,0.198 10 false Torque Converter 5.25,2.177 6.677,2.385 1.427,0.208 10 false Reduction Drive Gear 5.25,2.75 6.167,2.969 0.917,0.219 10 false Drive Pinion 5.25,3.26 6.708,3.458 1.458,0.198 10 false Reduction Driven Gear

Forward Clutch The number of Forward Clutch Discs 3
Reverse Brake The number of Reverse Brake Discs 3
Planetary Gear The number of Sun Gear Teeth 71
The number of Pinion Gear Teeth 16
The number of Ring Gear Teeth 102
Reduction Gear The number of Drive Gear Teeth 26
The number of Driven Gear Teeth 40
Final Gear The number of Drive Gear Teeth 18
The number of Driven Gear Teeth 64


MAIN FEATURE


a.

Fuel Economy Characteristics

i.

Unlike a conventional automatic transaxle that requires gear changes, a CVT allows driving at close to the optimal fuel economy line (a preset high torque range that has low-fuel consumption). Therefore, maximum engine performance can be obtained. In addition, by enlarging the lock-up area at lower speeds, transmission loss can be minimized during acceleration, ensuring that engine output is used effectively. During deceleration of the vehicle, an enlarged fuel cut area improves fuel economy. While the vehicle is being driven at high speeds, the wide pulley ratio range allows the engine speed to be lowered, significantly improving fuel economy.

X136063E01
4.875,1.146 5.104,0.438 5.104,0.438 5.24,0.438 true 5.146,1.958 5.417,1.958 true 1.698,0.219 2.167,0.417 0.469,0.198 10 false : CVT 1.698,0.427 3.094,0.625 1.396,0.198 10 false : Automatic Transaxle 1.375,1.438 2.333,1.635 0.958,0.198 10 false Engine Torque 5.302,0.333 7.156,0.542 1.854,0.208 10 false Optimal Fuel Economy Line 5.448,1.875 7.115,2.281 1.667,0.406 10 false Specific Fuel Consumption Map 5.063,2.552 6.031,2.75 0.969,0.198 10 false Engine Speed 3.031,2.563 4.646,2.781 1.615,0.219 10 false Area Used While Driving

X136064E01
2.042,1.01 2.74,1.01 2.74,1.01 3.094,1.865 true 2.063,1.313 2.76,1.313 2.76,1.313 3.104,2.146 true 4.729,2.417 5.521,2.417 true 3.688,2.781 3.844,2.969 3.844,2.969 4.552,2.969 true 1.302,0.51 3.49,0.708 2.188,0.198 10 false : Conventional Automatic Transaxle 0.479,0.906 2.115,1.104 1.635,0.198 10 false CVT Largest Pulley Ratio 0.583,1.219 2.135,1.438 1.552,0.219 10 false Fuel Cut Enlarged Area 1.219,2.135 2.229,2.333 1.01,0.198 10 false Engine Speed 2.969,3.458 4.604,3.656 1.635,0.198 10 false Enlarging Fuel Cut Area 4.833,3.292 5.823,3.5 0.99,0.208 10 false Vehicle Speed 4.604,2.875 6.354,3.104 1.75,0.229 10 false CVT Smallest Pulley Ratio 5.323,2.563 6.896,2.792 1.573,0.229 10 false Fuel Cut Engine Speed 5.563,2.323 6.021,2.521 0.458,0.198 10 false CVT 3.469,0.979 3.927,1.177 0.458,0.198 10 false 1st 4.188,1.031 4.531,1.24 0.344,0.208 10 false 2nd 5.063,1.26 5.521,1.458 0.458,0.198 10 false 3rd 5.031,1.917 5.354,2.094 0.323,0.177 10 false 4th



b.

CVT Power Performance

i.

One characteristic of a CVT is the ability to keep the engine speed at the optimum power output range during all operating conditions.


ii.

Unlike a conventional automatic transaxle that requires gear changes, a CVT allows vehicle acceleration while maintaining the same engine speed. Therefore, the optimal output range of the engine can be effectively used to obtain the maximum drive force.

X136088E01
4.167,1.083 4.167,1.802 true 0.094,0.49 1.719,0.885 1.625,0.396 10 false 2AZ-FE Engine Maximum Horse Power Point 6000 1.396,1.396 1.771,1.573 0.375,0.177 10 false 4000 0.594,1.75 1.583,1.948 0.99,0.198 10 false Engine Speed 1.385,2.115 1.781,2.302 0.396,0.188 10 false 2000 4.469,0.5 4.927,0.698 0.458,0.198 10 false CVT 3.615,1.792 5.844,1.99 2.229,0.198 10 false Conventional Automatic Transaxle 3.323,3.031 3.938,3.229 0.615,0.198 10 false Time 4.344,3.01 4.854,3.208 0.51,0.198 10 false Longer 2.531,3.427 4.813,3.646 2.281,0.219 10 false Accelerator Pedal Fully Depressed


iii.

A conventional automatic transaxle that requires gear changes has drive force characteristics (engine speed, relationship between torque and vehicle speed) that are unique for each gear that is selected. Therefore, the characteristic line of the drive force for an automatic transaxle is a curved line separated at each gear change. Unlike a conventional automatic transaxle, the characteristic line of the drive force of a CVT is a continuous line that delivers drive force seamlessly under almost all driving conditions. This allows smooth shifting and maximizes engine efficiency.


iv.

In addition, reducing the initial time lag that occurs during acceleration and optimizing drive force (engine speed X output torque) maximizes engine performance.

X136065E01
2.781,1.406 3.25,0.802 3.25,0.802 3.75,0.802 true 2.76,2.063 3.25,1.427 3.25,1.427 3.75,1.427 true 1.458,0.208 5.344,0.427 3.885,0.219 10 false : Areas where Drive Force is Most Effectively Utilized by CVT 1.958,0.583 2.427,0.792 0.469,0.208 10 false Larger 1.667,1.844 2.448,2.063 0.781,0.219 10 false Drive Force 3.792,0.698 6.01,0.896 2.219,0.198 10 false Drive Force Characteristics of CVT 3.792,1.333 6.938,1.552 3.146,0.219 10 false Drive Force Characteristics of Conventional A/T 3.688,3.323 4.594,3.51 0.906,0.188 10 false Wheel Speed 5.646,3.313 6.229,3.5 0.583,0.188 10 false Higher 3.052,3.542 5.26,3.75 2.208,0.208 10 false Drive Force Characteristic Diagram