Home › Engine / Hybrid System › 2AZ-FE INTAKE / EXHAUST › INTAKE SYSTEM
NM24M0E _51 Engine / Hybrid System _061722 2AZ-FE INTAKE / EXHAUST _0301076 INTAKE SYSTEM UN GENERAL/CONTROL/DETAILS F

2AZ-FE INTAKE / EXHAUST  INTAKE SYSTEM  GENERAL/CONTROL/DETAILS  DETAILS  


CONSTRUCTION


a.

Throttle Body

i.

The linkless-type throttle body is used and it realizes excellent throttle control.


ii.

A DC motor with excellent response and minimal power consumption is used for the throttle control motor. The engine ECU performs the duty ratio control of the direction and the amperage of the current that flows to the throttle control motor in order to regulate the opening angle of the throttle valve.

W135149C01
3.344,2.406 3.344,2.104 true 4.906,1.938 4.521,1.938 true 3.292,2.448 3.604,2.604 0.313,0.156 10 false *1 4.969,1.854 5.281,2.01 0.313,0.156 10 false *2
*1 Throttle Control Motor *2 Throttle Position Sensor




b.

Intake Manifold

i.

The intake manifold has been made of plastic to reduce the weight and the amount of heat transferred from the cylinder head. As a result, it has become possible to reduce the intake air temperature and improve the intake volumetric efficiency.


ii.

A mesh type gasket is used, in order to reduce the intake noise.

W135156C01
2.156,1.667 2.781,1.667 true 1.938,1.552 2.25,1.708 0.313,0.156 10 false *1
*1 Mesh Type Gasket - -