CONSTRUCTION
Exhaust Manifold
A stainless steel exhaust manifold is used for improving the warm-up of TWC (Three-Way Catalytic converter) and for weight reduction.
The TWC can improve exhaust emissions by optimizing the cell density and the wall thickness.
| *1 | TWC | - | - |
Exhaust Pipe
The exhaust pipe uses two ball joints in order to achieve a simple construction and ensured reliability.
| *1 | Ball Joint | *2 | Spring |
| *3 | Bolt | *4 | Gasket |
| *5 | TWC | *6 | Sub Muffler |
| *7 | Main Muffler | - | - |