Home › Engine / Hybrid System › 2GR-FE INTAKE / EXHAUST › INTAKE SYSTEM
NM24M0E _51 Engine / Hybrid System _061730 2GR-FE INTAKE / EXHAUST _0301078 INTAKE SYSTEM UN GENERAL/CONTROL/DETAILS F

2GR-FE INTAKE / EXHAUST  INTAKE SYSTEM  GENERAL/CONTROL/DETAILS  DETAILS  


CONSTRUCTION


a.

Air Cleaner

i.

A nonwoven, full-fabric type air cleaner element is used.


ii.

Resonators have been provided to reduce the amount of intake air sound.

W135317C01
3.667,1.25 4.583,0.5 4.583,0.5 4.917,0.5 true 4.25,2.5 4.583,2.083 4.583,2.083 4.917,2.083 true 4.25,3.833 4.583,3.417 4.583,3.417 4.917,3.417 true 4.25,4.667 4.583,4.25 4.583,4.25 4.917,4.25 true 3.5,6.333 4.583,5.167 4.583,5.167 4.917,5.167 true 5.417,6.583 5.833,6.25 5.833,6.25 6,6.25 true 3.583,7.583 4,8 4,8 4.167,8 true 0.667,5.167 0.833,5.167 0.833,5.167 1.083,5.667 true 4.948,0.396 5.146,0.594 0.198,0.198 10 false *1 4.948,1.979 5.156,2.167 0.208,0.188 10 false *2 4.948,3.313 5.156,3.531 0.208,0.219 10 false *3 4.969,4.146 5.198,4.344 0.229,0.198 10 false *4 4.958,5.073 5.156,5.25 0.198,0.177 10 false *5 6.042,6.146 6.271,6.354 0.229,0.208 10 false *6 4.219,7.906 4.427,8.125 0.208,0.219 10 false *7 0.479,5.063 0.677,5.281 0.198,0.219 10 false *8
*1 Air Cleaner Hose with Resonator *2 Air Cleaner Cap
*3 Air Cleaner Element (Nonwoven Fabric) *4 Air Cleaner Case
*5 Air Cleaner Inlet No.2 *6 Sidebranch
*7 Resonator *8 Air Cleaner Inlet




b.

Throttle Body

i.

A link-less type throttle body in which the throttle position sensor and the throttle control motor are integrated is used. It realizes excellent throttle valve control.


ii.

In the throttle control motor, a DC motor with excellent response and minimal power consumption is used. The engine ECU performs the duty ratio control of the direction and the amperage of the current that flows to the throttle control motor in order to regulate the throttle valve angle.

W135290C01
2.833,2.333 3.25,2.333 3.25,2.333 3.5,1.917 true 4.333,1.583 5,1.583 true 2.656,2.229 2.865,2.417 0.208,0.188 10 false *1 5.042,1.469 5.26,1.698 0.219,0.229 10 false *2
*1 Throttle Control Motor *2 Throttle Position Sensor




c.

Intake Air Chamber

i.

The intake air chamber is made of plastic to realize lightweight.


ii.

The intake air chamber contains an intake air control valve. This valve is activated by ACIS (Acoustic Control Induction System) and is used to alter the intake pipe length to improve the engine performance in all speed range.


iii.

The ACIS actuator uses an electric actuator and is laser-welded onto the intake air chamber. Many of the components are made of plastic for weight reduction.

W135291C01
0.917,0.417 1.25,0.417 1.25,0.417 1.5,0.917 true 0.5,1.5 0.833,1.5 0.833,1.5 1,1.25 true 2.333,1.313 2.333,0.896 true 0.74,0.323 0.938,0.51 0.198,0.188 10 false *1 0.313,1.396 0.521,1.615 0.208,0.219 10 false *2 2.281,1.354 2.49,1.583 0.208,0.229 10 false *3
*1 Intake Air Control Valve *2 ACIS Actuator
*3 Laser-welding - -


HINT:

Laser-welding: In laser-welding, a laser-absorbing material (for the intake air chamber) is joined to a laser-transmitting material (for the ACIS actuator). Laser beams are then irradiated from the laser-transmitting side. The beams penetrate the laser-transmitting material to heat and melt the surface of the laser-absorbing material. Then, the heat of the laser-absorbing material melts the laser-transmitting material and causes both materials to become welded.




d.

Intake Manifold

i.

Lightweight aluminum alloy is used for the intake manifold.


ii.

The intake manifold gaskets have rubber coating applied onto surface, and provide superior durability.

W135292C01
4.333,0.583 6.417,2.083 2.083,1.5 0.917,2.333 1.167,2.333 1.167,2.333 1.333,2.083 true 1.417,2.479 1.667,2.479 1.667,2.479 1.833,2.229 true 5.333,1.198 5.5,0.865 5.5,0.865 5.667,0.865 true 0.729,2.229 0.938,2.417 0.208,0.188 10 false *1 4.396,0.646 4.625,0.875 0.229,0.229 10 false *a 5.698,0.771 5.917,0.969 0.219,0.198 10 false *b 4.531,1.25 4.75,1.479 0.219,0.229 10 false *c 6.052,1.26 6.281,1.49 0.229,0.229 10 false *d 1.229,2.385 1.438,2.573 0.208,0.188 10 false *1 1.531,1.938 1.688,2.135 0.156,0.198 10 true A 1.115,1.781 1.271,1.979 0.156,0.198 10 false A
*1 Gaskets - -
*a A-A Cross Section *b Rubber Coating
*c Outer Side *d Intake Port Side