Home › Engine / Hybrid System › 2AZ-FE LUBRICATION › LUBRICATION SYSTEM
NM24M0E _51 Engine / Hybrid System _061724 2AZ-FE LUBRICATION _0301083 LUBRICATION SYSTEM UN GENERAL/CONTROL/DETAILS F

2AZ-FE LUBRICATION  LUBRICATION SYSTEM  GENERAL/CONTROL/DETAILS  GENERAL  


OUTLINE


a.

The lubrication circuit is fully pressurized and oil passes through an oil filter.


b.

The trochoid gear type oil pump is chain-driven by the crankshaft.


c.

The oil filter is attached downward from the crankcase to improve serviceability.


d.

Along with the adoption of the VVT-i system, the cylinder head is provided with a VVT-i controller and a camshaft timing oil control valve. This system is operated by the engine oil.

W135178C01
2.688,0.844 2.5,0.292 2.5,0.292 2.344,0.292 true 1.875,0.948 2.313,0.948 true 1.865,1.333 2.521,1.333 true 1.865,1.5 2.865,1.5 true 1.906,2.469 2.854,2.469 true 1.906,2.823 2.844,2.823 true 3.313,3.344 3.75,3.344 true 2.115,0.198 2.427,0.354 0.313,0.156 10 false *1 1.656,0.854 1.969,1.01 0.313,0.156 10 false *2 1.656,1.219 1.969,1.375 0.313,0.156 10 false *3 1.656,1.406 1.969,1.563 0.313,0.156 10 false *4 1.688,2.354 2,2.51 0.313,0.156 10 false *5 1.698,2.74 2.01,2.896 0.313,0.156 10 false *6 3.844,3.26 4.156,3.417 0.313,0.156 10 false *7
*1 VVT-i Controller *2 Camshaft Timing Oil Control Valve
*3 Chain Tensioner *4 Oil Return Hole
*5 Drive Chain *6 Oil Pump
*7 Oil Filter - -