SYSTEM CONTROL
Dual Winding System
This type alternator uses a dual winding system. This system consists of two sets of three-phase windings whose phases are staggered 30°. Because the magnetic fluctuations of the respective windings cancel each other out, magnetic noise and radio frequency interference are reduced.
CONSTRUCTION
Alternator Pulley
A helical coil type one-way clutch is used on the alternator pulley in order to reduce the load that acts on the auxiliary equipment belt.
The pulley mounting nut and the alternator pulley have been integrated to achieve a compact construction.
| *1 | Coil Spring | *2 | Pulley |
| *3 | Helical Coil Type One-way Clutch | - | - |