Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM › from 2016.05
NM24M0E _58 Vehicle Interior _061656 METER / GAUGE / DISPLAY _0300922 METER / GAUGE SYSTEM UN GENERAL/CONTROL/DETAILS F

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  GENERAL/CONTROL/DETAILS  DETAILS  


FUNCTION


a.

Buzzer

i.

The table below shows the warning and reminder functions of the buzzer in the combination meter assembly.

Priority Item
1 Reverse Warning
2 Front Seat Belt Warning (Level 2)
3 Front Seat Belt Warning (Level 1)
4 Unexpected Vehicle Motion Warning (Step 1)
5 Unexpected Vehicle Motion Warning (Step 2)
6 Engine Oil Pressure Warning
7 EPS Warning
8 Door Open when Shift Lever not in P Warning
9 Entry and Start System Warning (Intermittent)*1
10 Key Reminder*2
11 Entry and Start System Warning (Once)*1
12 Multi-information Display Warning*3
13 Immobiliser Certification Reminder*1
14 Parking Brake Engaged Warning
15 Door Open while Driving Warning
16 Sport Shift Reject Warning
17 Light Reminder
18 Turn Signal/Hazard Warning Operation

*1: Models with Entry and Start System

*2: Models without Entry and Start System

*3: Models with Color TFT Type Multi-information Display



b.

Multi-information Display

i.

General

·

The multi-information display (models with color TFT type multi-information display) shows the following information.

Item Outline
Shift Position Indicator The current shift position is displayed.
Ambient Temperature
·

The outside temperature is displayed.

·

When the outside temperature drops below 3°C (37°F), an ice warning illuminates to warn the driver to drive with caution due to possibly icy road conditions. After the ice warning flashes 10 times, this warning stays on. When the temperature reaches 5°C (41°F), this warning goes off.


·

Odo Meter

·

Trip Meter


·

Displays the odometer, trip meter A or trip meter B.

·

Displayed item can be switched by pressing the ODO/TRIP switch.


Fuel Gauge Displays the fuel remaining amount.
Information
·

The following information can be displayed on the multi-information display by switching between tabs.

- Drive Information

- Eco Information

- Settings

·

The tab can be switched using the RIGHT/LEFT switch of the steering pad switch assembly.


Interruption Display The following displays that appear as soon as the set conditions are met:
- TOYOTA Parking Assist-sensor System
Trip Summary Display When the ignition switch is turned off, displays the distance traveled, elapsed time and fuel economy from when the ignition switch was turned on until it was turned off.

·

The drive information and eco information shows the following information.

Item Outline
Drive Information
·

The items selected on the setting screen can be displayed. 2 items can be selected among the following:

- Average Fuel Consumption

- Average Vehicle Speed After Engine Start-up

- Elapsed Time After Engine Start-up

·

In addition to the above functions, the following items can be displayed.

- Cruising Range


Eco Information
·

The following items can be displayed:

- Fuel Consumption Record

- Past Record

- Fuel Consumption





ii.

Display Function Flow

The multi-information display can be switched as shown in the flow chart below:

Y210068E01
0.969,0.594 2.198,0.813 1.229,0.219 10 false Warning Display*d 4.75,0.604 6.5,0.833 1.75,0.229 10 false Door Unlock Mode Display 3.042,0.917 3.417,1.125 0.375,0.208 10 false OFF 2.542,0.979 2.76,1.177 0.219,0.198 10 false *b 2.594,1.292 2.906,1.49 0.313,0.198 10 false *a 4.188,0.688 4.427,0.885 0.24,0.198 10 false *a 4.188,0.979 4.406,1.177 0.219,0.198 10 false *b 4.177,1.302 4.417,1.5 0.24,0.198 10 false *a 3.677,1.813 5.115,2.01 1.438,0.198 10 false Engine switch on (IG) 3.313,2.354 3.938,2.563 0.625,0.208 10 false Opening 3.635,2.729 3.875,2.917 0.24,0.188 10 false *f 0.542,3.427 1.677,3.813 1.135,0.385 10 false Diagnosis Trouble Code 1.885,3.552 2.104,3.75 0.219,0.198 10 false *b 1.969,4 2.281,4.198 0.313,0.198 10 false *a 1.969,5.49 2.281,5.688 0.313,0.198 10 false *a 4.948,4.771 5.26,4.969 0.313,0.198 10 false *a 4.979,4.281 5.198,4.479 0.219,0.198 10 false *b 1.927,5 2.146,5.198 0.219,0.198 10 false *b 2.188,6.844 2.5,7.042 0.313,0.198 10 false *a 1.667,7.438 1.885,7.635 0.219,0.198 10 false *b 0.635,4.896 1.719,5.135 1.083,0.24 10 false Interrupt Display 3.115,3.365 4.24,3.583 1.125,0.219 10 false Status Display*c 5.354,4.177 6.552,4.396 1.198,0.219 10 false Warning Display*c 2.583,3.896 4.281,4.115 1.698,0.219 10 false 1. Drive Information Tab 2.594,4.479 4.208,4.688 1.615,0.208 10 false 2. Eco Information Tab 2.594,5.073 3.708,5.281 1.115,0.208 10 false 3. Setting Tab 0.615,6.667 1.865,6.865 1.25,0.198 10 false Warning Display*d 3.635,6.271 5.448,6.49 1.813,0.219 10 false Engine Switch on (IG) to off 3.25,6.646 3.917,6.865 0.667,0.219 10 false Ending*e 3.458,7.26 3.917,7.458 0.458,0.198 10 false OFF

Item Display Change Condition
*a Conditions are met.
*b Conditions are not met.
*c Item or display is selected by operating the steering pad switch.
*d If there are multiple display requests, items will be displayed in sequence.
*e Odometer, elapsed time (After start), distance (after start), average fuel consumption (after start) and eco score result are displayed.
*f After engine switch is turned on (IG).



iii.

Display Tab Operation

The information currently displayed can be switched using the RIGHT/LEFT switch of the steering pad switch assembly.

Y210069C01
4.427,0.708 4.813,0.708 4.813,0.708 4.813,1.281 true 4.417,2.229 5.281,2.229 5.281,2.229 5.281,1.458 true 4.25,0.615 4.563,0.771 0.313,0.156 10 false *a 4.25,2.146 4.563,2.302 0.313,0.156 10 false *b 0.542,2.802 0.854,2.958 0.313,0.156 10 false *c 2.76,2.813 3.073,2.969 0.313,0.156 10 false *d 5.021,2.813 5.333,2.969 0.313,0.156 10 false *e
*a Left Switch *b Right Switch
*c Drive Information *d Eco Information
*e Settings - -




iv.

Drive Information

·

The drive information tab shows vehicle information such as drivable range and fuel consumption.

·

The drive information display can be changed using the UP/DOWN switch of the steering pad switch assembly.

Y210070C01
4.99,1.083 4.99,0.688 4.99,0.688 5.385,0.688 true 4.979,1.625 4.979,2.167 4.979,2.167 5.396,2.167 true 5.417,0.615 5.729,0.771 0.313,0.156 10 false *a 5.417,2.073 5.729,2.229 0.313,0.156 10 false *b 0.5,2.792 0.813,2.948 0.313,0.156 10 false *c 2.708,2.781 3.021,2.938 0.313,0.156 10 false *d 4.948,2.781 5.26,2.938 0.313,0.156 10 false *e
*a UP Switch *b Down Switch
*c Drive Information *d Speedometer and Cruising Range
*e Blank - -


·

The following indication can be displayed in cruise information mode:

Information Outline
Drive Information
·

2 items can be selected among the following:

- Average Fuel Consumption

- Average Vehicle Speed After Engine Start-up

- Elapsed Time After Engine Start-up

·

In addition to the above functions, the following items can be displayed.

- Cruising Range


Speedometer and Cruising Range Displays the current vehicle speed and cruising range.
Blank -



v.

Eco Information

·

The eco information tab shows vehicle information such as fuel consumption.

·

The eco information display can be changed using the UP/DOWN switch of the steering pad switch assembly.

Y210071C01
4.365,0.688 4.969,0.688 4.969,0.688 4.969,1.344 true 5.063,1.115 5.063,0.688 5.063,0.688 5.552,0.688 true 5.052,1.615 5.052,2.083 5.052,2.083 5.552,2.083 true 4.188,0.583 4.5,0.74 0.313,0.156 10 false *a 5.583,0.594 5.896,0.75 0.313,0.156 10 false *b 5.583,1.99 5.896,2.146 0.313,0.156 10 false *c 0.552,2.792 0.865,2.948 0.313,0.156 10 false *d 2.75,2.792 3.063,2.948 0.313,0.156 10 false *e 5.01,2.792 5.323,2.948 0.313,0.156 10 false *f
*a Enter Switch *b UP Switch
*c Down Switch *d Fuel Consumption Record
*e Past Record *f Fuel Consumption


·

The following indication can be displayed in eco information mode:

Information Outline
Fuel Consumption Record
·

Displays a value that has been calculated by the combination meter based on the distance driven and the volume of fuel consumed.

·

The monthly average fuel consumption for the current month, last month, 2 months ago, 3 months ago, and 1 year ago, is displayed with bar graphs.

·

The monthly travel distances are also displayed.

·

While the "Fuel Consumption Record" screen is displayed, proceeds to the "Reset" screen when the enter switch is pressed and held.


Past Record
·

The average fuel consumption performances are ranked in the 1st, 2nd and 3rd among the records, and the respective fuel efficiency value, date and travel distance are also displayed.

·

In addition, when the current performance is within the top 100, the current rank is shown. If the performance is ranked outside the top 100, "Outside Ranking" is displayed.

·

When the "Past Record" screen is displayed, proceeds to the "Reset" screen when the enter switch is pressed and held.


Fuel Consumption
·

The average fuel consumption, at 5 minute intervals or 1 minute intervals, is calculated from the distance the vehicle has traveled for 5 minutes or 1 minute and the amount of fuel the vehicle has consumed for that travel distance, and the calculation result is expressed with bar graphs.

·

The current fuel consumption is calculated by the combination meter based on the distance driven and the volume of fuel consumed, and the calculation result is expressed with bar graphs.

·

When the "Fuel Consumption Record" screen is displayed, proceeds to the interval time (5 minutes/1 minute) selection screen when the enter switch is pressed and held.





vi.

Setting Function

·

The items displayed on the multi-information display can be customized.

·

The following items can be selected on the information setting screen.

Item Available Setting
Drive Information 2 items can be selected among the following:
·

Average Fuel Consumption

·

Average Vehicle Speed After Engine Start-up

·

Elapsed Time After Engine Start-up


Calendar and Clock
·

Date, month and year can be set.

·

Select to adjust clock of the combination meter.


Interruption Display The interruption display can be set to on/off.
Trip Summary Display The trip summary display can be set to on/off:
Initialization The set items can be initialized.



vii.

Warning Mode Function

·

When a warning is necessary, the warning display interrupts the current display on the multi-information display.

·

The master warning light may illuminate or blink and the buzzer in the combination meter assembly may sound depending on the item displayed on the multi-information display.

Priority Display Master Warning Light Buzzer
1 Engine Stopped Shift to P Blinks Sounds
Engine Stopped Stop in a Safe Place Blinks Sounds
2 Braking Power Low Stop in a Safe Place See Owner's Manual Blinks Sounds
3 Door open (while driving) (image display) Blinks Sounds
Door open (image display) - -
Clearance sonar detection (image display) - -
Parking Assist Malfunction Illuminates -
Clean Parking Assist Sensor Illuminates -
4 SHIFT TO P POSITION Blinks Sounds
5 Release Parking Brake Blinks Sounds
3rd Seat Illuminates Sounds
Key Not Detected Check Key Location Blinks Sounds
6 Antilock Brake System Malfunction Visit Your Dealer - Sounds
Engine Coolant Temp High Stop in a Safe Place See Owner's Manual Illuminates Sounds
(image display)
Charging System Malfunction See Owner's Manual
Illuminates -
Check Steering Lock System Illuminates -
(image display)
Low Oil Pressure Stop in a Safe Place See Owner's Manual
Illuminates Sounds
7 Turn Lights Off Blinks Sounds
Window Open Blinks Sounds
Depress Brake Pedal, Touch Engine Switch with Key - Sounds
Depress Brake Pedal, And Push Engine Switch To Start - -
Steering Lock Active Blinks Sounds
8 Key Battery Low Illuminates Sounds
Headlight System Malfunction Visit Your Dealer Illuminates Sounds
9 Traction Control Turned Off - -