OUTLINE
The smart entry & start system has a wireless door lock remote control function and engine immobilizer function. Furthermore, in this system, the following functions (entry function and start function) are also possible simply by carrying the key in the driver's possessions without using a key or transmitter button.
Door unlock/lock (entry unlock/entry lock functions)
Engine start simply by pressing the engine switch while depressing the brake pedal (start function)
Back door open (entry back door open function)
This system is optional equipment on the GL grade for the G.C.C. countries and China models.
MAJOR DIFFERENCE
The major differences between the start function and conventional ignition key function are as follows.
| Model | New | Previous |
|---|---|---|
| Function | Start (Push Button) | Conventional Ignition Key |
| Switch | Engine Switch | Ignition Switch |
| Key Cylinder | - | Ignition Key Cylinder |
| Key | With a built-in transmitter for the smart entry & start system | ·
With a built-in transponder chip for the engine immobilizer system ·
With a built-in transmitter for the wireless door lock remote control system |
| Relay | Four Relays (ACC, IG1, IG2, and ST CUT Relays) | Three Relays (IG1, IG2, and ST Relays) |
| Power Relay Control | Main Body ECU | Contact Type Ignition Switch |
| Security | Restricts the operation of the engine switch unless the certification ECU recognizes the ID code of the key. | Restricts the starting of the engine unless the transponder key ECU recognizes the ID code of the key. |
| Restricts the unlocking of the steering lock unless the steering lock ECU receives unlock request signals from the certification ECU. | A steering lock mechanism mechanically restricts the movement of the steering wheel in unison with the movement of the key cylinder. |