Home › Power Source / Network › NETWORKING › CAN COMMUNICATION SYSTEM
NM24M0E _57 Power Source / Network _061449 NETWORKING _0299869 CAN COMMUNICATION SYSTEM UN GENERAL/CONTROL/DETAILS F

NETWORKING  CAN COMMUNICATION SYSTEM  GENERAL/CONTROL/DETAILS  DETAILS  


DIAGNOSIS


a.

If a malfunction occurs on CAN communication line, the ECU that is connected to CAN communication line stores the DTCs (Diagnostic Trouble Codes) in its memory.


b.

There are 2-digit DTCs and 5-digit DTCs for CAN communication.

i.

The 5-digit DTCs can be read by connecting an intelligent tester II to the DLC3.


ii.

The 2-digit DTCs can be read by connecting the SST (09843-18040) to TC and CG terminals of the DLC3.

HINT:

For details, see the Previa/Tarago Repair Manual.