Home › Power Source / Network › NETWORKING › MULTIPLEX COMMUNICATION SYSTEM
NM24M0E _57 Power Source / Network _061449 NETWORKING _0299867 MULTIPLEX COMMUNICATION SYSTEM UN GENERAL/CONTROL/DETAILS F

NETWORKING  MULTIPLEX COMMUNICATION SYSTEM  GENERAL/CONTROL/DETAILS  DETAILS  


FUNCTION


a.

An intelligent tester II can change the specification of the systems or functions.

System Intelligent Tester II Display Content Content Default Selection

*: Only for Models with Smart Entry & Start System

Wireless Door Lock Remote Control System Open Door Warning* Function to make the buzzer sound for 10 seconds if the door is open when locking with the wireless door lock. ON ON/OFF
Wireless Control ON/OFF of the wireless door lock function. ON ON/OFF
Hazard Answer Back Function to turn ON/OFF of the hazard answer back of the wireless door lock. ON ON/OFF
Auto Lock Time Function to change the time until re-locking after unlocking with the wireless door lock. 30 s 30 s/60 s
Wireless Buzzer Resp* Function to turn ON/OFF of the wireless buzzer response function. ON ON/OFF
Unlock 2 Operation Function to unlock the driver's door by pressing the unlock button of the transmitter once and to unlock all the doors by pressing it twice. In the OFF setting, pressing one time makes all the doors unlocked. ON ON/OFF
Illuminated Entry System Lighting Time Function to change the lighting time after closing the door. (It will quickly fade out in case of selecting the power source mode to IG-ON.) ON ON/OFF
Illumination System Function to light up the room light, key illumination and foot light when one of the following occurs; ignition turn ON, door unlocked or door open. ON ON/OFF
Light Control Function to light up the room light, key illumination and foot light when the ignition switch is ON and the shift position is not P. ON ON/OFF
I/L ON W/Unlock (Interior light ON w/door key unlock) Function to illuminate the room light, etc. when the door is unlocked with a transmitter, door key or door lock control switch. ON ON/OFF
I/L when ACC OFF (Light the I/L when ACC OFF) Function to illuminate the room light when the power source mode is selected from "ACC" to "OFF". ON ON/OFF
Warning Key Low Battery Warning* (Warn when the key battery becomes low) Function to set a warning function for the first time when a key battery becomes low. ON ON/OFF
Light Reminder ON/OFF of the light reminder buzzer. OFF ON/OFF
Key Remind Sound To change the frequency of the key reminder buzzer. Normal Normal/Fast/Slow/0 s
Seat Belt Warning Function to change the seat-belt warning buzzer. D/P ON D/P ON/D ON/P ON/D/P OFF
Air Conditioner Set Temperature Shift Function to control with the shifted temperature against the display temperature. Normal +2 °C/+1 °C/Normal/-1 °C/-2 °C
Air Inlet Mode In case of turning the A/C ON when you desire to make the compartment cool down quickly, this is the function to change the mode automatically to RECIRCULATED mode. Auto Manual/Auto
Compressor Mode Function to turn the A/C ON automatically by pressing the AUTO button when the blower is ON and the A/C is OFF. Auto Manual/Auto
Evaporator Control Function to set the evaporator control to the AUTOMATIC position (AUTO) to save power or to the coldest position (MANUAL) to dehumidify the air and to prevent the windows fogging up. Auto Manual/Auto
Compressor/Air Inlet DEF operation Function to turn the A/C ON automatically linking with the FRONT DEF button when A/C is OFF. Link Normal/Link
Foot/DEF Automatic Blow Up Function Function to switch the blower level automatically when the defroster is ON. ON ON/OFF
Foot/DEF Auto Mode Function to turn the air flow from FOOT/DEF ON automatically when AUTO MODE is ON. ON ON/OFF
Ambient Temperature Shift Function to control with the shifted ambient temperature against the display ambient temperature. Normal +3 °C/+2 °C/+1 °C/Normal/-1 °C/-2 °C/-3 °C
Smart Entry & Start System* Select IG ON Available Area Function to choose the available area for key to start E/G and cancel the steering lock. All Front/All
Park Wait Time Function to set a wait time to permit opening a door after it being locked. 2.5 s 0.5 s/1.5 s/2.5 s/5 s
Back Door Opening Operation Function to open a trunk when the key is detected inside the trunk. Long Long/Twice/Off
PSD & PBD Operation PBD SW Operation Function to change the operation method of operating the PBD by pressing on PBD SW. 0.8 s 0.8s/0s
Wireless PBD Operation Function to change the operation method of operating the PBD by transmitter. 0.8 s Pr 1 Time/2 Times/0.8 s Pr/OFF
PSD SW Operation (RR) Function to change the operation method of operating the PSD by pressing on PSD SW (rear right side). 0 s 0.8 s/0 s
PSD SW Operation (LR) Function to change the operation method of operating the PSD by pressing on PSD SW (rear left side). 0 s 0.8 s/0 s
Wireless PSD Operation (RR) Function to change the operation method of operating the PSD by transmitter (rear right side). 0.8 s Pr 1 Time/2 Times/0.8 s Pr/OFF
Wireless PSD Operation (LR) Function to change the operation method of operating the PSD by transmitter (rear left side). 0.8 s Pr 1 Time/2 Times/0.8 s Pr/OFF