MAIN FEATURE
Front Design
The front design realizes a sharp, innovative look through the dynamic forms and character lines that sweep from the front bumper to the sides.
Four-beam headlights consist of the projector-type low beams, clearance lights, and turn signal lights enclosed in the same lens.
Headlights using the HID (High Intensity Discharge) lights and the intelligent AFS (Adaptive Front-lighting System) are equipment on some models.
The upper part of the radiator grille has been plated and the lower part has been smoke-plated to realize an elegant appearance.
The fog lights mounted on the front bumper are equipment on all models.
The front bumper hole covers mounted on the front bumper are standard equipment on the Australia and G.C.C. Countries models.
Rear Design
A plated license garnish and a back door garnish with the same construction as the rear combination lights are used to realize an elegant rear design.
LEDs (Light Emitting Diodes) are used for the stop lights, taillights, and rear lights (taillights) to realize a crystal look.
A rear fog light mounted on the rear bumper is standard equipment on some models.
Side Design
The character line that sweeps from the front to the rear of the vehicle realizes a dynamic and elegant side design.
LED type side turn signal lights, which are built into the outside rear view mirrors, are standard equipment on all models.
A rear spoiler, which has an integrated look with the back door, is standard equipment on all models.
Roof rails are available as optional equipment on some models.
Exterior Design (AERAS Grade)
The exclusive designs of the rear combination lights, radiator grille and front bumper have been adopted on the AERAS grade.
Aluminum evaporation coating is applied to the headlight extensions.
Clear smoke outer lenses are applied to the rear combination lights.