Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BODY STRUCTURE
NM24M0E _59 Vehicle Exterior _062204 EXTERIOR PANELS / TRIM _0303679 BODY STRUCTURE DE DETAILS F

EXTERIOR PANELS / TRIM  BODY STRUCTURE  DETAILS  SAFETY FEATURES  


CONSTRUCTION


a.

General

i.

The impact absorbing structure of the new model can effectively help reduce the impact in the event of a front or side collision. This structure also realizes high-performance occupant protection through the use of reinforcement and member that help minimize cabin deformation.



b.

Impact Absorbing Structure for Front Collision

i.

The reinforcements are provided at the front suspension towers to help reduce the deformation of the back ends of the front side members.


ii.

The shape of the floor members has been optimized to distribute the impact energy from the front side members to the main floor member and the floor members, to help suppress the deformation of the right and left frames.

Y209727C01
2.635,3.406 2.635,3.073 true 4.417,3.25 4.417,3.083 4.417,3.083 4.073,2.635 true 4.708,3.26 4.708,3.094 4.708,3.094 4.01,2.479 true 6.25,1.417 6,1.417 6,1.417 3.833,2.25 true 6.167,0.917 5.917,0.917 5.917,0.917 3.583,2.167 true 2.75,0.583 2.5,0.583 2.5,0.583 2.5,1.75 true 2.49,2.125 1.156,2.125 1.156,2.125 1.156,2.375 true 3.333,3.417 3.333,3.25 3.333,3.25 2.667,2.833 true 5.292,3.135 5.292,2.969 5.292,2.969 4.125,2.375 true 2.802,0.51 3.115,0.667 0.313,0.156 10 false *1 1.063,2.427 1.375,2.583 0.313,0.156 10 false *2 2.563,3.427 2.875,3.583 0.313,0.156 10 false *3 3.24,3.438 3.552,3.594 0.313,0.156 10 false *4 4.333,3.302 4.646,3.458 0.313,0.156 10 false *5 1.094,2.948 1.406,3.104 0.313,0.156 10 false *a 4.635,3.292 4.948,3.448 0.313,0.156 10 false *5 6.292,1.365 6.604,1.521 0.313,0.156 10 false *5 6.219,0.833 6.531,0.99 0.313,0.156 10 false *5 5.219,3.177 5.531,3.375 0.313,0.198 10 false *6
*1 Front Suspension Tower *2 Reinforcement
*3 Under Member *4 Front Side Member
*5 Floor Members *6 Main Floor Member
*a Front Impact Energy - -




c.

Impact Absorbing Structure for Side Collision

i.

The high strength sheet steel is used for the center pillar outer reinforcements and roof reinforcements to achieve excellent rigidity.


ii.

The reinforcements and front door side impact protection beams are provided in the inner and outer areas of the belt line inside the front door panels to achieve excellent rigidity.

Y209728C01
2.583,0.583 2.583,0.167 2.583,0.167 2.75,0.167 true 1.583,1.25 1.583,0.417 1.583,0.417 1.75,0.417 true 1.927,2.479 1.927,2.229 1.927,2.229 2.26,1.896 true 4.083,2.417 4.083,2.167 4.083,2.167 3.583,1.667 true 2.833,1.031 4.417,0.365 4.417,0.365 4.583,0.365 true 1.792,0.354 2.104,0.51 0.313,0.156 10 false *1 2.802,0.104 3.115,0.26 0.313,0.156 10 false *2 4.604,0.292 4.917,0.448 0.313,0.156 10 false *3 1.854,2.51 2.167,2.667 0.313,0.156 10 false *4 4.01,2.448 4.323,2.604 0.313,0.156 10 false *4 3.229,2.469 3.542,2.625 0.313,0.156 10 false *a 5.625,1.979 5.938,2.135 0.313,0.156 10 false *b 2.469,1.115 2.594,1.271 0.125,0.156 8 true A 3.135,0.917 3.26,1.073 0.125,0.156 8 true A
*1 Door Belt Line Reinforcement *2 Roof Reinforcement
*3 Center Pillar Outer Reinforcement *4 Side Impact Protection Beams
*a Side Impact Energy *b A - A Cross Section



iii.

The bulkheads are provided in the rocker panels to effectively transmit the side impact load to the floor cross member.

Y209729C01
1.5,0.5 1.5,0.167 1.5,0.167 1.75,0.167 true 2,2.417 2,2.25 2,2.25 2.25,1.75 true 6,0.667 6.167,0.417 6.167,0.417 6.417,0.417 true 5,1.417 5,1.083 5,1.083 5.25,1.083 true 1.792,0.083 2.104,0.24 0.313,0.156 10 false *1 1.906,2.417 2.219,2.573 0.313,0.156 10 false *2 6.427,0.344 6.74,0.5 0.313,0.156 10 false *3 4.938,1.458 5.25,1.615 0.313,0.156 10 false *2 3.365,2.406 3.677,2.563 0.313,0.156 10 false *a 5.781,2.323 6.094,2.479 0.313,0.156 10 false *b 2.573,1.094 2.729,1.292 0.156,0.198 10 true A 2.573,2.156 2.729,2.354 0.156,0.198 10 true A
*1 Floor Cross Member *2 Bulkhead
*3 Rocker Panel - -
*a Side Impact Energy *b A - A Cross Section



iv.

A head impact protection structure is used. With this type of construction, if the occupant's head hits against the roof side rail and pillar in reaction to a collision, the inner panel of the roof side rail and pillar collapses to help reduce the impact.

Y209730E01
2.542,0.51 6.969,0.865 4.427,0.354 10 false : Head Impact Protection Structure



d.

Lessening Pedestrian Injury

i.

The cowl panel uses an energy absorbing structure to lessen the impact from above in order to help protect pedestrians.

Y209731C01
5.865,2.115 5.865,1.948 5.865,1.948 5.531,1.615 true 6.552,1.083 6.385,1.083 6.385,1.083 5.802,1.417 true 4.49,1.115 4.323,1.115 4.323,1.115 4.323,1.448 true 5.75,0.667 5.583,0.667 5.583,0.667 5.333,1.5 true 4.51,1.042 4.823,1.198 0.313,0.156 10 false *1 6.583,1.021 6.896,1.177 0.313,0.156 10 false *2 5.802,2.135 6.115,2.292 0.313,0.156 10 false *3 5.198,2.344 5.51,2.5 0.313,0.156 10 false *a 1.354,1.688 1.51,1.844 0.156,0.156 10 true A 1.865,1.292 2.021,1.448 0.156,0.156 10 true A 5.792,0.583 6.104,0.74 0.313,0.156 10 false *b
*1 Hood Panel *2 Cowl Top Inner Panel
*3 Cowl Top Outer Panel - -
*a A - A Cross Section *b Energy Absorbing Structure




e.

Lessening Pedestrian Head Injury

i.

An energy absorbing structure is provided around the hood lock to help lessen the injury to the pedestrian's heads.


ii.

An energy absorbing bracket is provided at the area where the front fender is mounted to help lessen the injury to the pedestrian's heads.

Y209732C01
2.167,2.333 2.167,1.75 2.167,1.75 2.417,1.75 true 1.365,2.917 1.365,2.333 1.365,2.333 1.615,2.333 true 5.719,1.625 5.719,1.375 5.719,1.375 5.219,1.208 true 2.292,2.583 2.625,2.333 2.625,2.333 2.875,2.333 true 2.031,4 2.031,3.75 2.031,3.75 1.615,2.917 true 3.417,4.25 3.417,3.75 3.417,3.75 4.167,3.417 true 2.448,1.688 2.76,1.844 0.313,0.156 10 false *1 2.917,2.229 3.229,2.385 0.313,0.156 10 false *2 5.646,1.646 5.958,1.802 0.313,0.156 10 false *3 3.333,4.281 3.646,4.438 0.313,0.156 10 false *4 1.635,2.26 1.948,2.417 0.313,0.156 10 false *a 1.969,4.031 2.125,4.188 0.156,0.156 10 false *b
*1 Hood Panel *2 Hood Lock Reinforcement
*3 Energy Absorbing Bracket *4 Front Fender
*a Energy Absorbing Structure *b Energy Absorbing Stroke




f.

Lessening Pedestrian Leg Injury

i.

An impact absorber is provided on the back of the front bumper cover to help lessen the injury to the pedestrian's legs.


ii.

On the models for Australia, an impact absorber is provided below the radiator support. This construction, which prevents the pedestrian's legs from going under the vehicle, helps dampen the impact applied to the pedestrians.

Y209733C01
2.396,0.813 2.396,0.563 2.396,0.563 2.896,0.479 true 1.875,1.833 1.875,1.583 1.875,1.583 2.958,1.167 true 3.385,1.167 3.635,0.833 3.635,0.833 3.885,0.833 true 3.5,2.5 4,1.833 4,1.833 4.25,1.833 true 2.344,0.844 2.656,1 0.313,0.156 10 false *1 1.771,1.875 2.083,2.031 0.313,0.156 10 false *2 3.917,0.781 4.229,0.938 0.313,0.156 10 false *3 4.26,1.76 4.573,1.917 0.313,0.156 10 false *4
*1 Front Bumper *2 Impact Absorber
*3 Front Bumper Reinforcement *4 Impact Absorber (On the Australia Models Only)