CONSTRUCTION
General
Effective application of the vibration damping and noise suppressant materials reduce engine noise and road noise.
Sound Absorbing and Vibration Damping Materials
The sound isolation materials are provided in the frame cross sections of the various areas of the body to achieve excellent quietness.
The high density felt that excels in sound absorption is used in the dash panel outer silencer and dash panel inner silencer to help reduce the amount of engine noise entering the cabin.
The quarter liner is provided to help reduce the amount of road noise entering the cabin.
| *1 | Dash Panel Outer Silencer No.2 | *2 | Dash Panel Outer Silencer |
| *3 | Dash Panel Inner Silencer | *4 | Quarter Liner |
| *a | Asphalt Sheet | *b | Sponge Material |
| *c | Foamed Material | - | - |
A hood silencer and a cowl silencer are provided to help reduce the amount of engine noise entering the cabin.
| *1 | Hood Panel | *2 | Hood Silencer |
| *3 | Cowl Silencer | - | - |
Reducing Wind Noise
Wind noise has been reduced through the adoption of the following constructions:
The offset between the roof panel and the windshield glass has been reduced.
The offset between the front pillar and the windshield glass surface has been optimized.
The location of the front wipers and the shape of the cowl louver have been optimized.
| *1 | Windshield Glass | *2 | Roof Panel |
| *3 | Front Pillar | *4 | Front Door Glass |
| *5 | Wiper Blade | *6 | Wiper Arm |
| *7 | Cowl Louver | *8 | Hood Panel |
| *a | A - A Cross Section | - | - |