CONSTRUCTION
Instrument Panel (LHD Models)
The instrument panel integrates a center cluster to achieve a spacious form.
The combination meter is located in the upper part of the instrument panel to ensure visibility.
A woodgrain ornament, which extends from the driver side to the front passenger side, is provided near the center of the instrument panel.
The shift gate, air conditioner control panel, engine switch, and register knob have been plated to achieve an elegant look.
Instrument Panel (RHD Models)
The instrument panel upper which includes the side registers has a bold design structure.
The center cluster panel whose structure appears to float from the instrument panel and the front seat are matched by the synthetic leather panels to express a smart, spacious and advanced look.
The center cluster panel has been integrated into the air conditioning control panel, and an electrostatic touch panel and piano black paint are used to provide a modest yet advanced feeling of quality.
A plated look instrument panel ornament is used.
Storage Space
Instrument Panel (LHD Models)
An upper box is used on the driver side. The door of the upper box opens when its button is pressed.The upper box contains a card holder.
A small storage space* is provided below the register on the driver side, and a box to store small objects is provided in the instrument finish lower panel.
*: Models with the switch base are not provided with the small storage space.
A glove box and an upper box are used on the front passenger side. The door of the upper box opens when its button is pressed.
A cup holder and an ashtray are provided below the heater control panel.
A light to illuminate the cup holder is provided at the front personal light in the overhead console.
Instrument Panel (RHD Models)
An upper box (280 x 65 x 45 mm) is used on the driver side. A pull open type is used for door of upper box.
A box to store small objects is provided in the instrument finish lower panel.
A glove box and an upper box are used on the front passenger side. The door of the upper box opens when its button is pressed.
A glove box and an upper box are used on the front passenger side. The door of the upper box opens when its button is pressed.
A cup holder and a box are provided below the heater control panel.
Console
A sliding console is provided on the 7-passenger models.
To suit the layout of the rear No.1 seat, the console slide movement is set to 944 mm (37.2 in.).
The console contains a drawer-type storage box and a cup holder. Its top plate can be used as a table.
Door Trim
A door pocket and bottle holder is provided in the front door trim.
A bottle holder is provided in the slide door trim.
A pocket and a cup holder are provided in the right side quarter trim (the left side contains only a cup holder).
The GL grade is provided with lights in the front door trim and the slide door trim to illuminate the door pocket and the bottle holder.
Luggage Space
Along with the provision of the rear No. 2 seat with stowing function, an under-floor storage space, which stores the rear No. 2 seat, has been provided in the luggage area of the2GR-FE engine models for Australia.
When it is not being used for stowing the rear No. 2 seat, it can be used as a storage space with a capacity of 146 liters.
A deck board, which is foldable and removable, is optional equipment on the 2GR-FE engine models for Australia.
Conversation Mirror
A conversation mirror for viewing inside the car is provided at the front of the overhead console for convenience.