MAJOR DIFFERENCE
The design o exterior for AERAS grade has been changed.
MAIN FEATURE (Except AERAS Grade)
Front Design
The front design realizes a sharp, innovative look through the dynamic forms and character lines that sweep from the front bumper to the sides.
Four-beam headlights consist of the projector-type low beams, clearance lights, and turn signal lights enclosed in the same lens.
Headlights using the HID (High Intensity Discharge) lights and the intelligent AFS (Adaptive Front-lighting System) are equipment on some models.
The upper part of the radiator grille has been plated and the lower part has been smoke-plated to realize an elegant appearance.
The fog lights mounted on the front bumper are equipment on all models.
The front bumper hole covers mounted on the front bumper are standard equipment on the Australia and G.C.C. Countries models.
Rear Design
A plated license garnish and a back door garnish with the same construction as the rear combination lights are used to realize an elegant rear design.
LEDs (Light Emitting Diodes) are used for the stop lights, taillights, and rear lights (taillights) to realize a crystal look.
A rear fog light mounted on the rear bumper is standard equipment on some models.
Side Design
The character line that sweeps from the front to the rear of the vehicle realizes a dynamic and elegant side design.
LED type side turn signal lights, which are built into the outside rear view mirrors, are standard equipment on all models.
A rear spoiler, which has an integrated look with the back door, is standard equipment on all models.
Roof rails are available as optional equipment on some models.
MAIN FEATURE (AERAS Grade)
Front Design
Large changes have been made to the design of the front of the vehicle, such as the hood and fender, to emphasize the egg shape and achieve an advanced design. (*a)
Both sides of the bumper support the egg shape of the vehicle body to achieve a look of stability. (*b)
The long sharp headlights and accessory lights and the front bumper are arranged to achieve a continuous and stylish design. (*c)
The front bumper corner projects out to express spaciousness and stability.
The combination of sharp lines and tensioned surfaces expresses precise and composed harmony.
By utilizing the characteristics of a single-lens Bi-Beam LED, a thinned and advanced headlight look has been achieved. (*d)
The characteristic signature created by the plated molding that extends from the ultra thin upper grille to the headlights and the line that flows from the clearance lights and accessory lights gives an advanced and iconic impression. (*e)
Rear Design
The simple flow of the rear combination lights from the back door in the direction of the side doors provides an advanced look. (*a)
The combination of the LED line emission stop lights and surface emission tail lights expresses flow and creates an iconic impression. (*b)
Side Design
The height of the sideline at the front of the vehicle has been increased to emphasize a sense of protrusion toward the front of the vehicle. (*a)
The side cladding panel which utilizes a design in which the character line extends from the front of the vehicle to the rear emphasizes a stretched silhouette. (*b)
The rear combination lights extend from the shoulder of the vehicle through to the rear to achieve an elongated and unrestrained silhouette. (*c)