Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE CONTROL SYSTEM › from 2016.05
NM24M0E _54 Brake _061442 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0299859 BRAKE CONTROL SYSTEM UN GENERAL/CONTROL/DETAILS F

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE CONTROL SYSTEM  GENERAL/CONTROL/DETAILS  GENERAL  


OUTLINE


a.

The brake control functions (ABS, EBD, Brake Assist, TRC, VSC, Hill-start Assist Control and Cooperative Control with EPS) are standard equipment.


b.

The VSC+ system is used on the models equipped with VSC.



MAJOR DIFFERENCE


a.

Models without VSC have been discontinued.


b.

An emergency brake signal for RHD models has been added.


c.

The combination meter for RHD models and the yaw rate and deceleration sensor have been changed.


d.

The location of the VSC OFF switch for RHD models has been changed.