OUTLINE
The 2GR-FE engine models use the U660E automatic transaxle. This automatic transaxle is a compact, lightweight and high-capacity 6-speed Super ECT (Electronically Controlled Transaxle).
A gate type shift lever is used.
The shift control cable with a length adjustment mechanism is used.
The S mode position is provided on the side of the D position.
A shift lock system is used. Its construction and operation are the same as the 2AZ-FE engine models. (Click hereDrivetrain>U241E AUTOMATIC TRANSMISSION / TRANSAXLE>AUTOMATIC TRANSMISSION SYSTEM>DETAILS)
*: Models with Smart Entry & Start System
The shift control cable is fixed by the lock piece of the adjustment mechanism. Adjustment of the shift control cable is possible by releasing the lock piece from the cable. For details, see the Previa/Tarago Repair Manual.
MAJOR DIFFERENCE
This manual has been modified from the previous manual as shown below:
The shift lock release button has been changed.
SPECIFICATION
Automatic Transaxle Assembly
| Transaxle Type | U660E | |
|---|---|---|
| Combination with Engine | 2GR-FE | |
|
*1: Counter gear ratio included *2: Differential included *3: The weight shown is the weight of the part fully filled with fluid. |
||
| Gear Ratio | 1st | 3.300 |
| 2nd | 1.900 | |
| 3rd | 1.420 | |
| 4th | 1.000 | |
| 5th | 0.713 | |
| 6th | 0.608 | |
| Reverse | 4.148 | |
| Differential Gear Ratio*1 | 3.458 | |
| Fluid Capacity*2 | Liters (US qts, Imp. qts) | 6.5 (6.87, 5.72) |
| Fluid Type | TOYOTA Genuine ATF WS | |
| Weight (Reference)*3 | kg (lb) | 94.4 (208.1) |
| C1 | No. 1 Clutch | No. of Discs | 4 |
| C2 | No. 2 Clutch | 3 | |
| B1 | No. 1 Brake | 4 | |
| B2 | No. 2 Brake | 5 | |
| B3 | No. 3 Brake | 3 | |
| F1 | No. 1 One-way Clutch | No. of Sprags | 20 |
| Ravigneaux Planetary Gear Unit | No. of Front Sun Gear Teeth | 30 | |
| No. of Rear Sun Gear Teeth | 27 | ||
| No. of Long Pinion Gear Teeth | 20 | ||
| No. of Short Pinion Gear Teeth | 22 | ||
| No. of Ring Gear Teeth | 69 | ||
| U/D Planetary Gear Unit | No. of Sun Gear Teeth | 66 | |
| No. of Pinion Gear Teeth | 21 | ||
| No. of Ring Gear Teeth | 110 | ||
| Counter Gear | No. of Drive Gear Teeth | 44 | |
| No. of Driven Gear Teeth | 47 | ||
Torque Converter Assembly
| Torque Converter Assembly Type | 3-element, 1-step, 2-phase |
| Stall Torque Ratio | 1.78 |
OIL PUMP
| Transaxle Type | U660E |
| Drive Gear Teeth | 10 |
| Driven Gear Teeth | 11 |