Home › General › INTRODUCTION › FEATURES › from 2016.05
NM24M0E _V1 General _062202 INTRODUCTION _0303368 FEATURES UN GENERAL/CONTROL/DETAILS F

INTRODUCTION  FEATURES  GENERAL/CONTROL/DETAILS  PERFORMANCE  


OUTLINE


a.

2AZ-FE Engine

i.

The 2AZ-FE engine has been carried over from the previous model. This engine realizes high performance,quietness, fuel economy, and clean emissions through the use of the VVT-i (Variable Valve Timing-intelligent) system, DIS (Direct Ignition System), and ETCS-i (Electronic Throttle Control System-intelligent).

Item Specification
No. of Cyls. & Arrangement 4-cylinder, In-line Type
Valve Mechanism 16-valve DOHC, Chain Drive (with VVT-i)
Displacement cm3 (cu. in.) 2362 (144.2)
Bore x Stroke mm3 (in.) 88.5 x 96.0 (3.48 x 3.78)
Compression Ratio 9.8 : 1
Maximum Output [EEC] kW@rpm 125@6000
Maximum Torque [EEC] N*m@rpm 224@4000

V118415E01
4.573,0 6.26,0.198 1.688,0.198 10 false Output (kW) 1.927,0.479 3.667,0.719 1.74,0.24 10 false Torque (Nm) 4.802,3.427 6.75,3.74 1.948,0.313 10 false Engine Speed (rpm) 2.521,3.521 2.865,3.75 0.344,0.229 8 false 1000 2.854,3.521 3.198,3.75 0.344,0.229 8 false 2000 3.156,3.51 3.5,3.74 0.344,0.229 8 false 3000 3.469,3.51 4.083,3.708 0.615,0.198 8 false 4000 3.781,3.51 4.396,3.708 0.615,0.198 8 false 5000 4.104,3.51 4.719,3.708 0.615,0.198 8 false 6000 4.406,3.51 5.021,3.708 0.615,0.198 8 false 7000 2.115,0.99 2.5,1.135 0.385,0.146 8 false 240 2.115,1.188 2.5,1.333 0.385,0.146 8 false 220 2.115,1.396 2.5,1.542 0.385,0.146 8 false 200 2.104,1.583 2.49,1.729 0.385,0.146 8 false 180 2.104,1.781 2.49,1.927 0.385,0.146 8 false 160 2.115,1.969 2.5,2.115 0.385,0.146 8 false 140 4.865,0.281 5.25,0.427 0.385,0.146 8 false 140 4.875,0.49 5.26,0.635 0.385,0.146 8 false 130 4.875,0.688 5.26,0.833 0.385,0.146 8 false 120 4.875,0.896 5.26,1.042 0.385,0.146 8 false 110 4.875,1.104 5.26,1.25 0.385,0.146 8 false 100 4.875,1.323 5.26,1.469 0.385,0.146 8 false 90 4.885,1.531 5.271,1.677 0.385,0.146 8 false 80 4.885,1.729 5.271,1.875 0.385,0.146 8 false 70 4.885,1.938 5.271,2.083 0.385,0.146 8 false 60 4.885,2.146 5.271,2.292 0.385,0.146 8 false 50 4.885,2.354 5.271,2.5 0.385,0.146 8 false 40 4.885,2.552 5.271,2.698 0.385,0.146 8 false 30 4.885,2.771 5.271,2.917 0.385,0.146 8 false 20 4.885,2.969 5.271,3.115 0.385,0.146 8 false 10 4.896,3.177 5.281,3.323 0.385,0.146 8 false 0



b.

2GR-FE Engine

i.

The newly developed 2GR-FE engine is a 3.5-liter, 24-valve DOHC V6 engine. This engine uses the Dual VVT-i (Variable Valve Timing-intelligent) system, DIS (Direct Ignition System), ACIS (Acoustic Control Induction System), and ETCS-i (Electronic Throttle Control System-intelligent). These control functions achieve improved engine performance, fuel economy, and reduced exhaust emissions.

Item Specification
No. of Cyls. & Arrangement 6-cylinder, V Type
Valve Mechanism 24-valve DOHC, Chain Drive (with Dual VVT-i)
Displacement cm3 (cu. in.) 3456 (210.9)
Bore x Stroke mm3 (in.) 94.0 x 83.0 (3.70 x 3.27)
Compression Ratio 10.8 : 1
Maximum Output [EEC] kW@rpm 202@6200
Maximum Torque [EEC] N*m@rpm 340@4700



c.

U241E Automatic Transaxle

i.

The U241E 4-speed automatic transaxle is used on model with 2AZ-FE engine.

Transaxle Type 4-speed Automatic
U241E

*: Counter Gear Ratio Included

Drive Type 2WD
Gear Ratio* 1st 3.943
2nd 2.197
3rd 1.413
4th 1.020
Reverse 3.145



d.

K112 Continuously Variable Transaxle (CVT)

i.

A K112 Continuously Variable Transaxle (CVT) is used on models with 2AZ-FE engine.


ii.

The K112 is a steel belt type Continuously Variable Transaxle (CVT) with a torque converter, controlled by fully electronic hydraulic pressure control. The CVT achieves class-leading fuel economy, plus a feeling of smooth driving and excellent drivability via the use of electronic control systems and a pulley-belt unit.

*: Counter Gear Ratio Included

Transaxle Type K112
Pulley Ratio Forward 2.396 to 0.428 (Pulley Ratio Width 5.598)
Reverse 1.668
Final Gear Ratio* 5.470



e.

U660E Automatic Transaxle

i.

The 2GR-FE engine models use the U660E automatic transaxle. This automatic transaxle is a compact,lightweight and high-capacity 6-speed Super ECT (Electronically Controlled Transaxle).

Transaxle Type 6-speed Automatic
U660E

*: Counter Gear Ratio Included

Engine Type 2GR-FE
Gear Ratio 1st 3.300
2nd 1.900
3rd 1.420
4th 1.000
5th 0.713
6th 0.608
Reverse 4.148
Differential Gear Ratio* 3.685



f.

Suspension

i.

A MacPherson strut type independent suspension is used for the front.


ii.

A torsion-beam type suspension is used for the rear.

X135908



g.

Steering

i.

The Electric Power Steering (EPS) system is used.


ii.

The rack and pinion type steering gear is used.



h.

Brake

Item Specification

*1: Diameter x Thickness

*2: Anti-lock Brake System

*3: Electronic Brake force Distribution

*4: Traction Control

*5: Vehicle Stability Control

Front Brake Type Ventilated Disc
Rotor Size (D x T)*1 mm (in.) 16 inch: 296 x 28 (11.65 x 1.10)
Rear Brake Type Solid Disc
Rotor Size (D x T)*1 mm (in.) 16 inch: 298 x 10 (11.73 x 0.394)
Brake Control ABS*2, EBD*3, Brake Assist, TRC*4, VSC*5, Cooperative Control with EPS

i.

VSC + System

1.

The brake control functions (ABS, EBD, Brake Assist, TRC, VSC, and Cooperative Control with EPS)are standard equipment on the China model, and optional equipment on all other models.

2.

In addition to the ABS, TRC, and VSC provided in the conventional system, the VSC+ system effects cooperative control with the EPS in order to realize excellent driving stability and maneuverability.