Home › General › SPECIFICATIONS › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › 2014.09–2016.05
RM24M0E _V1 General _059539 SPECIFICATIONS _0291738 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS F

SPECIFICATIONS  BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  TORQUE SPECIFICATIONS  


Brake Actuator (2AZ-FE without VSC)
Part Tightened N*m kgf*cm ft.*lbf
Brake actuator x Brake actuator bracket 8.0 82 71 in.*lbf
Brake actuator with bracket x Body 19 194 14
Brake actuator x Brake tube (without SST) 15 155 11
Brake actuator x Brake tube (with SST) 14 144 10

Brake Actuator (w/ VSC)
Part Tightened N*m kgf*cm ft.*lbf
Brake actuator assembly set nut 8.0 82 71 in.*lbf
Brake actuator with bracket set nut 19 194 14
Brake line flare nut M10 15 155 11
M12 20 199 14

Front Speed Sensor
Part Tightened N*m kgf*cm ft.*lbf
Front speed sensor body x Knuckle 8.5 87 75 in.*lbf
Front speed sensor clamp/Flexible hose clamp x Flexible hose bracket 18.5 189 14
Front speed sensor clamp x Side member 8.5 87 75 in.*lbf

Rear Speed Sensor
Part Tightened N*m kgf*cm ft.*lbf
Skid control sensor clamp bolt 8.5 87 75 in.*lbf

Yaw Rate Sensor
Part Tightened N*m kgf*cm ft.*lbf
Yaw rate sensor x Body 6.0 61 53 in.*lbf