Home › General › SPECIFICATIONS › PARKING BRAKE
RM24M0E _V1 General _059539 SPECIFICATIONS _0291740 PARKING BRAKE F

SPECIFICATIONS  PARKING BRAKE  SERVICE DATA  


Parking brake pedal travel Slowly depress the pedal with a force of approximately 300 N (31 kgf, 67.5 lbf) and count the number of clicks. 4 to 6 clicks (without rear brake dragging)
Parking brake switch Resistance 1 - Body ground Parking brake switch ON (Switch pin released) Below 1 Ω
Resistance 1 - Body ground Parking brake switch OFF (Switch pin pushed in)) 10 kΩ or higher
Brake disc inside diameter Standard 190 mm (7.48 in.)
Maximum 191 mm (7.52 in.)
Parking brake shoe lining thickness Standard 2.45 mm (0.0965 in.)
Minimum 1.0 mm (0.0394 in.)
Parking brake shoe clearance adjustment Standard shoe adjuster return notch 8 notches
Clearance between the parking brake shoe lever and C-washer Less than 0.35 mm (0.0138 in.)