Home › Engine / Hybrid System › 2GR-FE ENGINE CONTROL › MASS AIR FLOW METER
RM24M0E _51 Engine / Hybrid System _059540 2GR-FE ENGINE CONTROL _0291771 MASS AIR FLOW METER G

2GR-FE ENGINE CONTROL  MASS AIR FLOW METER  INSPECTION  


PROCEDURE

Hide 22204 1.INSPECT MASS AIR FLOW METER

a.

Visually check for any foreign matter on the platinum hot wire (heater) of the mass air flow meter.

OK:

There is no foreign matter.


If the result is not as specified, replace the mass air flow meter.


b.
A127786E09
0.501,0.059 1.798,0.196 1.297,0.137 10 Mass Air Flow Meter 2.399,0.645 2.728,0.815 0.330,0.170 10 E2 2.738,0.645 3.068,0.801 0.330,0.156 10 THA 2.811,1.483 2.564,0.866 false 2.969,1.462 2.935,0.849 false

Measure the resistance according to the value(s) in the table below.

Standard resistance:
Tester Connection Condition Specified Condition
1 (THA) - 2 (E2) -20°C (-4°F) 13.6 to 18.4 kΩ
1 (THA) - 2 (E2) 20°C (68°F) 2.21 to 2.69 kΩ
1 (THA) - 2 (E2) 60°C (140°F) 0.49 to 0.67 kΩ