Home › Engine / Hybrid System › 2GR-FE ENGINE CONTROL › CRANKSHAFT POSITION SENSOR
RM24M0E _51 Engine / Hybrid System _059540 2GR-FE ENGINE CONTROL _0291773 CRANKSHAFT POSITION SENSOR G

2GR-FE ENGINE CONTROL  CRANKSHAFT POSITION SENSOR  INSPECTION  


PROCEDURE

Hide 19315 1.INSPECT CRANKSHAFT POSITION SENSOR

a.
A094922

Measure the resistance of the crankshaft position sensor.

Standard resistance:
Tester Connection Condition Specified Condition
1 (NE+) - 2 (NE-) Cold 1,630 to 2,740 Ω
1 (NE+) - 2 (NE-) Hot 2,065 to 3,225 Ω


NOTICE:

The terms "Cold" and "Hot" refer to the temperature of the sensor. "Cold" is from -10 to 50°C (14 to 122°F) and "Hot" is from 50 to 100°C (122 to 212°F).


If the result is not as specified, replace the crankshaft position sensor.