Home › Engine / Hybrid System › 2GR-FE ENGINE CONTROL › ENGINE COOLANT TEMPERATURE SENSOR
RM24M0E _51 Engine / Hybrid System _059540 2GR-FE ENGINE CONTROL _0291774 ENGINE COOLANT TEMPERATURE SENSOR G

2GR-FE ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR  INSPECTION  


PROCEDURE

Hide 89422 1.INSPECT ENGINE COOLANT TEMPERATURE SENSOR

a.

Measure the resistance of the engine coolant temperature sensor.

A394013E01
4.906,2.51 6.594,2.781 1.688,0.271 10 false TEMPERATURE °C (°F) 3.958,0.073 5.198,0.385 1.24,0.313 10 false RESISTANCE kΩ

Standard resistance:
Tester Connection Condition Specified Condition
1 (E2) - 2 (THW) 20°C (68°F) 2.32 to 2.59 Ω
1 (E2) - 2 (THW) 80°C (176°F) 0.310 to 0.326 kΩ


NOTICE:

If checking the sensor in water, be careful not to allow water to contact the terminals. After checking, wipe the water off the sensor.


·

If the result is as specified, do not replace the engine coolant temperature sensor.

·

If the result is not as specified, replace the engine coolant temperature sensor.