Home › Engine / Hybrid System › 2GR-FE ENGINE CONTROL › ENGINE COOLANT TEMPERATURE SENSOR
RM24M0E _51 Engine / Hybrid System _059540 2GR-FE ENGINE CONTROL _0291774 ENGINE COOLANT TEMPERATURE SENSOR A

2GR-FE ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR  REMOVAL  


PROCEDURE

Hide 1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


Hide 28800 2.REMOVE BATTERY

Hide 89422 3.REMOVE ENGINE COOLANT TEMPERATURE SENSOR

a.
A160580

Disconnect the engine coolant temperature sensor connector.


b.

Using SST, remove the engine coolant temperature sensor and gasket.

SST
09817-33190