Home › Engine / Hybrid System › 2GR-FE ENGINE CONTROL › KNOCK SENSOR
RM24M0E _51 Engine / Hybrid System _059540 2GR-FE ENGINE CONTROL _0291776 KNOCK SENSOR G

2GR-FE ENGINE CONTROL  KNOCK SENSOR  INSPECTION  


PROCEDURE

Hide 89615 1.INSPECT KNOCK SENSOR

a.
U188225

Measure the resistance of the knock sensor.

Standard resistance:
Tester Connection Condition Specified Condition
1 (Ground) - 2 (Output) 20°C (68°F) 120 to 280 kΩ


If the result is not as specified, replace the knock sensor.