Home › Engine / Hybrid System › 2GR-FE ENGINE CONTROL › CAMSHAFT OIL CONTROL VALVE
RM24M0E _51 Engine / Hybrid System _059540 2GR-FE ENGINE CONTROL _0291781 CAMSHAFT OIL CONTROL VALVE G

2GR-FE ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 11101J 1.CHECK CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

a.
B135940E01
0.425,2.845 1.557,3.021 1.132,0.177 10 Intelligent Tester 0.6,2.589 0.6,2.832 false 1.48,2.058 1.864,2.214 0.385,0.156 10 DLC3 1.717,2.051 1.841,1.732 false

Check the operation.

i.

Connect the intelligent tester to the DLC3.


ii.

Turn the ignition switch to the ON position.


iii.

Turn the intelligent tester main switch on.


iv.

Start and warm up the engine.


v.

Select the menu items: Powertrain / Engine and ECT/ Active Test / Control the VVT System (Bank 1).


vi.

Operate the OCV using the intelligent tester, and then check the engine speed.

Standard condition:
Tester Operation Specified Condition
OCV is OFF Normal engine speed
OCV is ON Rough idling or engine stalls


If the operation is not as specified, check the oil control valve, wire harness, and ECM.