28371C
1.REMOVE IG2 RELAY
Remove the engine room No. 1 relay block cover.
Remove the IG2 relay from the engine room No. 1 relay block.
28371C
2.INSPECT IG2 RELAY
Measure the resistance of the IG2 relay.
| Tester Connection | Specified Condition |
|---|---|
| 3 - 5 | 10 kΩ or higher |
| 3 - 5 | Below 1 Ω
(when battery voltage is applied to terminals 1 and 2) |
If the result is not as specified, replace the relay.
28371C
3.INSTALL IG2 RELAY