85910A
1.REMOVE CIRCUIT OPENING RELAY (Marking: C/OPN)
Remove the engine room No. 1 relay block cover.
Remove the circuit opening relay from the engine room No. 1 relay block.
85910A
2.INSPECT CIRCUIT OPENING RELAY
Measure the resistance of the circuit opening relay.
| Tester Connection | Specified Condition |
|---|---|
| 3 - 5 | 10 kΩ or higher |
| 3 - 5 | Below 1 Ω
(when battery voltage is applied to terminals 1 and 2) |
If the result is not as specified, replace the relay.
85910A
3.INSTALL CIRCUIT OPENING RELAY