Home › Engine / Hybrid System › 2AZ-FE ENGINE CONTROL › KNOCK SENSOR
RM24M0E _51 Engine / Hybrid System _059541 2AZ-FE ENGINE CONTROL _0291791 KNOCK SENSOR G

2AZ-FE ENGINE CONTROL  KNOCK SENSOR  INSPECTION  


PROCEDURE

Hide 89615 1.INSPECT KNOCK SENSOR

a.
A093606E33
1.177,0.25 1.625,0.458 false 1.75,0.698 2.167,0.271 false 0.552,0.083 1.146,0.281 0.594,0.198 10 false Ground 2.188,0.083 2.708,0.281 0.521,0.198 10 false Output

Measure the resistance of the sensor.

Standard resistance:
Tester Connection Condition Specified Condition
1 (Ground) - 2 (Output) 20°C (68°F) 120 to 280 kΩ


If the result is not as specified, replace the knock sensor.