Home › Engine / Hybrid System › 2AZ-FE FUEL › FUEL TANK
RM24M0E _51 Engine / Hybrid System _059542 2AZ-FE FUEL _0291800 FUEL TANK A

2AZ-FE FUEL  FUEL TANK  DISASSEMBLY  


PROCEDURE

Hide 77209D 1.REMOVE FUEL TANK MAIN TUBE SUB-ASSEMBLY

a.
A393984

Remove the fuel tank main tube from the fuel tube clamps.


Hide 77026A 2.REMOVE NO. 1 FUEL EVAPORATION TUBE SUB-ASSEMBLY

a.

Remove the tube from the fuel tube clamps.


Hide 77285B 3.REMOVE NO. 1 FUEL TUBE CLAMP

a.

Remove the 2 tube clamps from the fuel tank.


Hide 77027 4.REMOVE NO. 2 FUEL EVAPORATION TUBE SUB-ASSEMBLY

a.
A139132E01
0.354,0.956 0.919,1.130 0.566,0.174 10 Retainer 1.925,1.531 1.561,1.061 false 1.561,1.061 1.046,1.061 false

Remove the tube from the tank.

NOTICE:
·

Remove any dirt and foreign matter on the tube joint before performing this work.


·

Do not allow any scratches or foreign matter on the parts when disconnecting them, as the fuel tube joint contains the O-rings that seal the plug.


·

Perform this work by hand. Do not use any tools.


·

Do not forcibly bend, twist or turn the nylon tube.


·

Protect the disconnected part by covering it with a plastic bag and tape after disconnecting the fuel tubes.




Hide 77641A 5.REMOVE NO. 1 FUEL TANK PROTECTOR

a.
A131617

Remove the 2 nuts and protector.


Hide 77512 6.REMOVE REAR FUEL TANK BRACKET

a.
A131616

Remove the 2 bolts and bracket.


Hide 77651B 7.REMOVE FUEL TANK CUSHION

a.
A131618

Remove the 6 fuel tank cushions from the fuel tank.