Home › Engine / Hybrid System › 2GR-FE FUEL › FUEL PUMP
RM24M0E _51 Engine / Hybrid System _059543 2GR-FE FUEL _0291805 FUEL PUMP G

2GR-FE FUEL  FUEL PUMP  INSPECTION  


PROCEDURE

Hide 23221 1.INSPECT FUEL PUMP ASSEMBLY

A288171E08
1.298,1.033 1.468,1.190 0.170,0.158 10 1 2.02,1.033 2.190,1.190 0.170,0.158 10 2 1.596,0.554 1.387,1.01 false 1.829,0.554 2.037,1.01 false

a.

Inspect fuel pump resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 0.2 to 3.0 Ω


If the result is not as specified, replace the fuel pump.



b.

Inspect fuel pump operation.

i.

Connect a battery positive (+) lead to terminal 2 of the connector, and a negative (-) lead to terminal 1. Check that the fuel pump operates.

NOTICE:
·

These tests must be performed within 10 seconds to prevent the coil from burning out.

·

Keep the fuel pump as far away from the battery as possible.

·

Always switch the voltage on and off on the battery side, not the fuel pump side.



If the pump does not operate, replace the fuel pump.