Home › Engine / Hybrid System › 2GR-FE EMISSION CONTROL › AIR FUEL RATIO SENSOR
RM24M0E _51 Engine / Hybrid System _059544 2GR-FE EMISSION CONTROL _0291811 AIR FUEL RATIO SENSOR G

2GR-FE EMISSION CONTROL  AIR FUEL RATIO SENSOR  INSPECTION  


PROCEDURE

Hide 89467B 1.INSPECT AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)

a.
A260262E03
2.01,3.615 2.646,3.479 false 1.438,3.594 0.667,3.396 false 1.417,4.042 0.688,4.135 false 2.719,3.365 3.167,3.646 0.448,0.281 10 false HA1A 0.385,3.271 0.594,3.542 0.208,0.271 10 false +B 0.302,4.073 0.698,4.333 0.396,0.26 10 false A1A- 0.26,2.5 2.688,3.156 2.427,0.656 10 false Component without harness connected: (Air Fuel Ratio Sensor) 0.073,0.052 0.781,0.365 0.708,0.313 10 false for Type A: 0.073,1.25 0.781,1.563 0.708,0.313 10 false for Type B:

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (HA1A) - 2 (+B) 20°C (68°F) for Type A:
1.8 to 3.4 Ω
for Type B:
1.6 to 3.2 Ω
1 (HA1A) - 4 (A1A-) - 10 kΩ or higher


If the result is not as specified, replace the air fuel ratio sensor.


Hide 89467C 2.INSPECT AIR FUEL RATIO SENSOR NO. 2 (for Bank 2 Sensor 1)

a.
A260262E04
2.031,3.625 2.667,3.49 false 1.438,3.615 0.667,3.417 false 1.417,4.052 0.688,4.146 false 2.719,3.375 3.167,3.656 0.448,0.281 10 false HA2A 0.406,3.292 0.615,3.563 0.208,0.271 10 false +B 0.323,4.063 0.719,4.323 0.396,0.26 10 false A2A- 0.26,2.49 2.771,3.146 2.51,0.656 10 false Component without harness connected: (Air Fuel Ratio Sensor) 0.031,0.042 0.74,0.354 0.708,0.313 10 false for Type A: 0.031,1.198 0.74,1.51 0.708,0.313 10 false for Type B:

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (HA2A) - 2 (+B) 20°C (68°F) for Type A:
1.8 to 3.4 Ω
for Type B:
1.6 to 3.2 Ω
1 (HA2A) - 4 (A2A-) - 10 kΩ or higher


If the result is not as specified, replace the air fuel ratio sensor No. 2.