Home › Engine / Hybrid System › 2AZ-FE EMISSION CONTROL › AIR FUEL RATIO SENSOR
RM24M0E _51 Engine / Hybrid System _059545 2AZ-FE EMISSION CONTROL _0291816 AIR FUEL RATIO SENSOR G

2AZ-FE EMISSION CONTROL  AIR FUEL RATIO SENSOR  INSPECTION  


PROCEDURE

Hide 89467B 1.INSPECT AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)

a.
U188352E02
0.677,1.708 0.854,2 false 0.688,1.531 0.948,1.635 false 0.396,1.729 0.25,1.948 false 0.385,1.5 0.219,1.24 false 0.979,1.542 1.375,1.688 0.396,0.146 10 false HA1A 0.135,1.979 0.51,2.125 0.375,0.146 10 false A1A- 0.917,1.948 1.313,2.094 0.396,0.146 10 false A1A+ 0.01,1.135 0.208,1.292 0.198,0.156 10 false +B

Measure the resistance of the sensor.

Standard resistance:
Tester Connection Specified Condition
1 (HA1A) - 2 (+B) 1.8 to 3.4 Ω at 20°C (68°F)
1 (HA1A) - 4 (A1A-) 10 kΩ or higher


If the resistance is not as specified, replace the sensor.