Home › Engine / Hybrid System › 2GR-FE INTAKE › INTAKE AIR CONTROL VALVE
RM24M0E _51 Engine / Hybrid System _059546 2GR-FE INTAKE _0291822 INTAKE AIR CONTROL VALVE G

2GR-FE INTAKE  INTAKE AIR CONTROL VALVE  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 17190 1.INSPECT INTAKE AIR SURGE TANK ASSEMBLY

a.

Inspection procedure when using the intelligent tester:

i.

Warm up the engine.


ii.

Stop the engine.


iii.

Connect the intelligent tester to the DLC3.


iv.

Turn the ignition switch on (IG).


v.

Turn the tester on.


vi.

Select the following menu items: DIAGNOSIS / ENHANCED OBD II / ACTIVE TEST / INTAKE CTL VSV1. Press the right or left button.


vii.
A129001

Make sure that a clicking sound is heard from the intake air control valve when current flows.

If the result is not as specified, replace the intake air surge tank.